Jump to content
SAU Community

Recommended Posts

Hi guys is there a write up on how to remove the standard head unit in an M35? I've done searches but can't find anything. I've found some V35 write ups/videos but they don't seem right with the M35. They say to remove the silver panel where the clock is in a V and where the time and A/C display is in an M then remove the panel under the steering wheel and undo a couple of screws. Is this right for a Stagea? It doesn't seem right to me but hey I'm probably wrong.

Thanks and merry Christmas

Link to comment
https://www.sau.com.au/forums/topic/461861-m35-head-unit-installremoval/
Share on other sites

Glove box out, panel under steering wheel out, clock panel out, gear knob off, center console out, the two panels with pockets on either side of center console out.. i used the v35 youtube vid for guidance and got it pretty quick

Edited by stripey

Just something I had trouble with, double check your harness before plugging it

DONT NOT GROUND THE RED/BLUE WIRE!!!! it is actually the cabin lights/parkers/tail lights!!!

I blew up the fuse by doing so with the harness I got.

Also, not sure if you got a metra kit for the double din conversion but make sure you have the air con control board as the oem one is most certainly just one big board shared with the stereo.

Had to take everything apart after I got one to install it and that's not something you want to do 3 times like I had to ;)

Just something I had trouble with, double check your harness before plugging it

DONT NOT GROUND THE RED/BLUE WIRE!!!! it is actually the cabin lights/parkers/tail lights!!!

I blew up the fuse by doing so with the harness I got.

Also, not sure if you got a metra kit for the double din conversion but make sure you have the air con control board as the oem one is most certainly just one big board shared with the stereo.

Had to take everything apart after I got one to install it and that's not something you want to do 3 times like I had to ;)

I'm not going double din, staying single din. Isn't the aircon separate to the stereo? I've only got a normal single din with gauges on top then I think aircon on top of that...

Got the head deck out and can see what you mean now. They should sell these at autobarn shouldn't they?

Also, what's outlined in the pic below I assume is the aux in? Does autobarn or similar sell an adapter to change what used to plug into that to a 3.5mm head phone jack for the aux in on new head deck?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...