Jump to content
SAU Community

Recommended Posts

Hi Everyone.

Welcome to the WA Group of Skylines Australia. Feel free to introduce yourself and post a picture of your car.

I'm looking at getting some meets or events happening, so if anybody is keen please post up here and keep an eye on the "Events" section on the WA forum.

What do you guys want to do, a breakfast meet, or a cruise or a bit of both?

We may look into attending show and shine events too if you guys are keen.

If you are interested please post up.

Link to comment
https://www.sau.com.au/forums/topic/462648-welcome-to-sau-wa/
Share on other sites

We used to do a breakfast in the city the last friday of every month but that was due to a lot of the regulars working in or around the CBD, I'm not sure where people are working these days though.

We could do a Sunday morning breakfast, probably somewhere central but not in a too built up area near the city so we can park our cars and look after them while we eat preferably which is not always possible with food places, but would anybody be up for something like that?

I'm open to any other suggestions such as activities, car related things, be it show and shines or other things.

I might also add this thread could be a good place to introduce yourself and post a picture of your car, so please show us what you got whether it's a GTS a T or GTR we want to see them all.

Edited by RB335

Have you all given any more thought about the cruise on the 28th boys?

Not particularly, I'm in Sydney ATM and fly back tomorrow. I'm going to One Day Sundays in the arvo at the Rosemount but could still make brekky somewhere.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...