Jump to content
SAU Community

Recommended Posts

hey guys

i know what your going to say 'search is your friend'. but i have read them and think i still need some help before blowing good money on aftermaket coil-packs i didnt need.

after installing a powerfc and upping the boost, the car has developed a misfire in two places. the first only happens about half of the time, when coming on boost at wot and low rpm, say 2900. and the second happens all of the time, at 5000rpm+ on full load. the tuner tried to get around it but thinks its the coil packs and couldn't really do much about it.

mods include: bkr7evx platinum plugs, hks fmic, cam gear at 3.5deg., powerfc, evc5 at 0.9bar, 3" full exhaust, shielded pod. te rest is stock turbo, inj, internals, manifolds etc...

i'm thinking one of the following:

collapsing pipe between tubo and afm

fatigued coil packs (highly likely)

air leak (unlikely - all new hoses and clamps etc.)

afm (dirty - i will ask the tuner if the voltage was ok, im sure he would have checked tho, if it was bad this would also eliminate the collapsing pipe)

plugs (fouled - i did the plugs myself at home, drove the car 20km to the dyno, not sure if they would foul up in this time)

any input appreciated.

-rb25

Link to comment
https://www.sau.com.au/forums/topic/46305-another-misfiring-r33/
Share on other sites

Hey dude.

Had the samt problem with mine when i upped the boost... and i had the same thought, coil packs... but, I think i may had some good news for you.

It was only the spark plugs. Try putting in some normal NON platmum or iridium plugs, and make sure the gap is 0.6. Use NGK BCP6ES make sure its the NON RESISTOR type.

I'm pretty certain that this will stop your misfiring. Try this first before anything else, as it's the cheapet thing that could go wrong. - looking at your mods, its also the most likely.

Give it a go and lemme know how it goes .

M

hey ross im having the same problem........i have my car tuned now and i get a couple of slight misfires at 12psi, no where as bad as it was previously but its still annoying.

Im using the bcpr6es and it was suggested to me to try them at 0.6 too, i cant think of what else is doing it other then the coil packs as i dont use a afm now, changed fuel pump, changed plugs from bkr7evx and all hoses and connections are fine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...