Jump to content
SAU Community

Recommended Posts

Helo Guys

I would like to import my personal RB20DET Drift build (https://www.facebook.com/fearmefiji/) from Fiji (Suva) to Melbourne, hopefully it was not damaged by TC Winston. It has too many modifications so will not want to rego or road worthy just for tracks. What options are there to get it here. Are there any agencies that can handle the Import/Freight/Customs clearance etc.

Any assistance would be highly appreciated.

post-138838-0-90018600-1456704726_thumb.jpg

post-138838-0-74201600-1456704736_thumb.jpg

post-138838-0-76568000-1456704746_thumb.jpg

post-138838-0-08265700-1456704757_thumb.jpg

post-138838-0-75948000-1456704767_thumb.jpg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/463303-importing-for-migration-purpose/
Share on other sites

Hey man, you might be better off stripping the car and finding a locally registered ceffy/R32 and transferring the parts onto that.

You're on to something here. Take all of the fruity goodies off and shove them in a registered shell.

If only using it for track work then race import it, need a cams license though. Could possibly bring it in via personal import also though would need rwc this way. Talk to any of the brokers on here, they'll sort you out. Iron Chef, J-spec, etc

I think what the OP means is more along the lines of someone to manage the logistics (although admittedly the import approval > compliance process cannot be overlooked).

You could try mobs like Clarke Customs, CPS, Seaway, NMT Shipping - all are in Melbourne.

Freight from Fiji to Australia may be nigh on impossible, especially as there will be no car carriers, only very infrequent bulk carriers, etc - would not be surprised if the cargo needed to go via Singapore intermodal hub, and then be changed over (I have zero knowledge on sea freight between Fiji and Australia). You'll also find that the costs of freight to port and from port are high - especially if cargo only lands in BNE not MEL port.

Almost no doubt that you would be better off just selling it as it is, or if you have the stock parts, getting it returned to stock, air freighting your goodies back to Mel, etc...but unless you think that to buy that same car here would cost you $30K or upwards, I'd encourage selling it there.

Out of interest - how did you get the car into Fiji in the first place? Did it come straight from Japan (I'd have though shipping from Japan to Fiji would be limited too)

Fiji gets the old taxis, etc. from Japan. But that also means they can get some cool stuff. It's very expensive to buy though.

Usually freight goes the other way (Aus -> Fiji lol). It's really not that much worth it, would be a lot of effort to get it registered considering it's modified.

You can find local registered ones for $10k or less.

But if you really want to, I guess you can make it happen. No idea on what companies would ship from Fiji to Aus sorry.

If you're really attached to the car then it's not technically difficult to import it to Australia. Firstly you can use the race import approval option, for which you would need a CAMS license. Contact a Customs Agent in Fiji to find out what it will cost to organise a container, as a rough guide you might be looking at $2,000 to $2,400 or so but it's variable depending on ex rates to the USD and also location and worldwide demand at any point in time. Clearance costs on the Aust side are also fairly expensive for containers so the shipping part won't be cheap. You have 5% import duty and 10% GST to factor in on top of the vehicle price and shipping.

As mentioned above already, if you want to use the personal import option you could do that, but you'd need to factor in registering the car once here which may be a bit of a drama with all those mods. You'd also need to be legitimately living in Fiji with the car for more than 12 months and have it registered in your name etc. with all the paperwork. And you'd need to show that you're returning permanently to Australia with the car -- they are very strict on this and will require evidence of you moving.

So it will depend how much you love that car as to whether you think it's worthwhile. Sometimes emotion is more important than final cost, sometimes only the $$ count !

Dollar wise, gut feel is that importing probably won't stack up compared to what you could buy something similar here for, as someone has already commented. Consider of course that you know your own car intimately, compared to buying another unknown vehicle.

Also, depending on the build year you may "soon" be able to use the new 25 year rule for Australia, perhaps from about late 2017 (late 1992 and above models and so on). You'd still have the registration issues but if the rule is similar to the existing 1988 and older rule, then it should allow you to import your modified car at which point you could decide just to use it on the track.

New 25 Year Import Rule for Australia - Prestige Motorsport

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...