Jump to content
SAU Community

Recommended Posts

Hi guys up for sale is my 1990 r32 gtr in black pearl metallic have owned the car for just about a year but it's time for it to go it's currently sitting on club registration

Okay time for the specs

ENGINE:

Has had a rebuilt engine have a receipt of it from previous owner

Nistune Ecu

Garret 2860-7 turbos

Tomei dump pipes

Custom havoc 3-3.5inch front pipes

Tomei 260" pon cams

Tomei cam gears

Splitfire Coilpacks

Apexi pod filters

Venom high flow cat

Varex open close exhaust tip welded onto a jasma exhaust

1000cc Bosch injectors

Walbro 400LPH fuel pump e85 rated

Car is currently running at 337kw on e85 tuned at racepace Motorsport

Wheels: current wheels are work emotion xXD9 18x10-15 all rounders with federal 595rsr tyres with around 70% tread ,for brakes it's running DBA street rotors along with project mu HC800 pads

Suspension: BLITZ ZZ-R coilovers

INterior: nismo 320km cluster the kms have stopped but recent rebuild makes it obvious it's only around few thousand Kms ,

Nismo gearknob

Now time for the bads:

Needs a new thermostat fan unit for the fan speed controller

New heater core

Has the usual dints from mechanics jacking under the skirts

Driver side seat has a small rip

Has the usual passenger side bubble

Has the usual small scratches post-135838-14567086590599_thumb.jpgpost-135838-14567087012727_thumb.jpgpost-135838-14567088110593_thumb.jpgpost-135838-14567088417368_thumb.jpgpost-135838-14567088667952_thumb.jpgpost-135838-14567088946231_thumb.jpgpost-135838-14567089172278_thumb.jpg

attachment=503708:ImageUploadedBySAU Community1456708514.935154.jpg]post-135838-14567085536203_thumb.jpg

post-135838-14567086166079_thumb.jpg

Currently asking for 27k slightly negotiable any reasonable offers will be accepted low BALLERS will be ignored

Feel free to text me on 0412510883

Location Narre warren melbourne victoria post-135838-14567090315082_thumb.jpgpost-135838-14567090423734_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/463314-r32-gtr-for-sale/
Share on other sites

  • 4 weeks later...
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...