Rb25det Custom Made Plenum Kit + Intercooler And Piping + More

[monts]

Hi Guys and girls,

I have a rb25det forward facing plenum kit for sale. I have purchased it and have since gone a different direction in my build. Kit conisits of

- Custom made aluminium plenum. Very well crafted retains factory throttle body and iac valve. Similar to plazmaman style where it a bolt on top section only.

This is beneficial over some other styles like greddy which use smaller runners and can cause decreased low down and midrange response.

I have recently got the plenum sand blasted to be powdercoated. So it is in a blast finish which sort of looks factory (was previously polished in some of the fitted shots).

One thing to note in the blasting process a little bit of pitting has happened near a weld. I dont think it would effect performance however if extremely fussy this can be welded up for next to nothing from an exhaust or radiator shop.

-Hybrid intercooler - Good functional condition. Could do with a polish if you want to run that way however I was going to paint black.

-Piping to suit cold side of intercooler to plenum - welded aluminium with decent size wall

-bov - turbosmart and welded on adapted which sits behind the bumper for extra stealthness

-hose fittings and clamps - bolts - throttle body and iac valve.

- Custom made accelerator cable to suit

The only thing left will be new gaskets and chuck it on. I have the gaskets i removed and they look in ok condition so they may even be able to be reused if your on a tight budget. The plenum sits nicely in the bay and has all appropriate vaccum line ports tapped into the bottom for clean install. Pickup or Postage Australia wide for $40 due to the size of box ill need to put it in. Thanks for looking.

Asking $650

0410616101

Edited March 30, 2016 by monts

[z00key]

$40 the lot posted? I will take it!

[monts]

haha woops ill fix that

[MrRx7s3]

Willing to separate the plenum? already have a front mount etc.

[monts]

Hey Mate,

I could be willing to separate the kit and remove the cooler from it. I can do it for 550 minus cooler. I will keep the rest of the kit intact as the pipes are specifically made to suit and accelerator cable is needed etc

[z00key]

Neo or non neo?

[monts]

its non neo. ive decided to go neo thats the only reason im selling

[MrRx7s3]

Ohh it wont fit neo even if you adapt the aac valve?

Edited March 30, 2016 by MrRx7s3

[Ben C34]

I've got some neo to pre neo aac valve adaptor plates if interested.

[monts]

Ohh it wont fit neo even if you adapt the aac valve?

Im not sure are neo bottom runners same as non neo?

[monts]

aac valve is included and can be wired in apparantly. neo throttle body wont fit if you can run a s2 one?

[MrRx7s3]

Can someone confirm.

[monts]

http://www.sau.com.au/forums/topic/390549-plazmaman-plenum-on-rb25det-neo/

have a read of that....it might be possible

[monts]

sold please delete