Jump to content
SAU Community

Recommended Posts

Got the car tuned last week after the SAFC was installed, and was happy with the result.

But then I went back to the original dyno where I got my first ever dyno to use as a comparison, but the result varied up to 25rwkw... Grrr damn dyno's.

I know dyno results are to be taken with a grain of salt, but which one do you think is closer to the truth...

Original dyno run

- Full 3" Exhaust

- Air filter

- 8 PSI

-Tubosmart II BOV

These 2 runs have been done in the last week

- Full 3" Exhaust

- Air filter / Partition / Feed

- 13 PSI

- GFB Hybrid BOV

- FMIC

- SAFCII

I find it hard to believe that a FMIC, SAFC, and up in boost from 8 to 13 results in only a 15rwkw increase on the Barnes dyno?

Link to comment
https://www.sau.com.au/forums/topic/46419-dyno-results/
Share on other sites

dont worry about dyno figures man, a while ago i got my car dynoed at APC and got 181rwkw with exhaust, pod, fmic and 10psi. Since then i got a wolf3d ecu and got that tuned with 12psi and i got 171rwkw at a different place. The car is definately alot faster and im not worried about the figures, ill just see what i can manage down the 1/4 :P

Link to comment
https://www.sau.com.au/forums/topic/46419-dyno-results/#findComment-942356
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...