Jump to content
SAU Community

Recommended Posts

Manufacturer/Model/Series/Year: Nissan/Skyline/R32GTR/1993

Price: $22,500 (Firm)

Location: Adelaide, SA


I was little hesitate to put her for sale. But I thought I should try to offer it for sale as I am looking into getting an R34 GTR V-Spec and it will be difficult to keep 3 generations in my lot. I have spent quite a few thousands of dollars (most of the receipts if not all can be provided.) I can also provide you w/ the name of mechanic (up on request) who did major maintenance in addition to the work I've done to it.


This one has been looked after mechanically, For its age it is reasonably looking good even though just recently it was professionally restored (front and rear bumpers, front lip, boot and rear spoiler resprayed)


Features:


Stock engine and tranny

At 119,000 km, the following changed: timing belt kit, new coolant, accessory belts, spark plugs, rocker cover seals, air intake seals, all oils, filters, engine flushed

Air pods (not sure the brand)

HKS front pipe

Aftermarket exhaust system (not sure the brand)

Stock coilovers

Stock front and rear sway bars

N1 side skirts

New rear window seal

New CV ball joints

New castor and camber bushes

New lower control arms

New front sway bar links

New shifter and hand brake boots

New side/guard blinkers

Nearly new battery (1 yr old, not used much, was isolated)

Stock steering wheel (VGC)

Nismo floor mats

Nismo front and rear strut bars

Aero side mirrors (brand unknown)

front wiper arms restored

G-sensor replaced

Aftermarket oil cooler

Slotted front discs

Enkie wheels w/ VG tread tyres

Braided brake lines

Engine oil and filter changed three times in 1.5 years (within ~1,000 km)


The interior is clean and in good condition, no cracks in the dash.


Things to note:

1) A split in the the dashboard plastic trim on top, but not obvious (repairable)

2) A small Bubble near the centre A/C vent

3) A split in the plastic centre trim, super glued

4) C pillars cardboard trims show some bubbles

5) driver's N1 side skirt front of rear wheel missing a piece (broken), it is hidden under car, you've got to bend over to notice it


That's all I can remember as I am currently living in my second home in Tasmania.


Kindly, excuse the pictures as it can be challenging to request from my family to take good pictures.


Therefore, I suggest for the interested parties that they should call me and then I'll have my brother to arrange time w/ you to inspect it. He will not allow anyone to drive it as he'll be doing the driving unless the buyer shows serious business w/ a deposit


The car is currently registered in SA and it will expire in the next two days. However, we'll offer 3 month rego w/ the deal


Please, no joy riders / salesman / scammers.


I am not negotiable and I am not interested in swaps.


Best way to contact me is to call at 0415064124.


Thank you for viewing.



post-88178-0-47595400-1460796291_thumb.jpg


post-88178-0-55992900-1460796321_thumb.jpg


post-88178-0-52659500-1460796347_thumb.jpg


post-88178-0-23017400-1460796482_thumb.jpg


post-88178-0-18982800-1460796503_thumb.jpg


post-88178-0-02471400-1460796540_thumb.jpg


post-88178-0-07975100-1460796387_thumb.jpg


post-88178-0-50916000-1460796411_thumb.jpg


post-88178-0-22587000-1460796450_thumb.jpg


post-88178-0-75736400-1460796598_thumb.jpg


post-88178-0-45374600-1460796947_thumb.jpg


post-88178-0-13285100-1460796968_thumb.jpg


post-88178-0-49366800-1460796996_thumb.jpg


post-88178-0-47241700-1460797022_thumb.jpg

post-88178-0-87597400-1460796621_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/464268-sold-stock-1993-r32-gtr-22500-firm/
Share on other sites

Evening mate, Sorry but does car have the following as from pics it dosnt look like it.

Front mesh over intercooler?

Standard Intercooler?

Brake ducts?

Infill in bar in standard grey finish? (part around cooler)

These are the bits and pieces that all add up to make a very standard car that's worth the good dollars.

Good point mate.

I should've clarifed little more.

From the title of this forum, I was more referring to stock engine and tranny and not necessary the whole being stock.

All I can remember is that it does not have the front mesh and the oil cooler is aftermarket, not sure the brand.

But I am not sure if it has the brake ducts as I have not touched and/or being around it for about a year. Too many GTR to keep up. :rolleyes:

Sent from my GT-I9000 using Tapatalk 2

  • 2 months later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...