Jump to content
SAU Community

Recommended Posts

Hey guys,
Got heaps of RB20/RB25 NEO R32/34 parts send me a message of what you need.


Can supply pictures upon request.

All items located in South Australia, happy to post at buyers expense.
Thanks


RB20DET
-RB20 Stock Turbo Heat Shield $30
-RB20 clutch lines (missing master > dis block) $20
-RB20 stock injector plugs (pigtails) $30
-RB20 powersteer pump $150
-RB20 stock head bolts $40
-RB20 CAS bracket $20
-RB20 Alternator bracket and adjuster bolt $30
-RB20 exhaust manifold heat shield $30
-RB20 stock turbo manifold $70
-RB20 flywheel needs a machine $50
-RB20 AC compressor $100
-RB20 various coolant hoses $70
-RB20 stock thermostat (good working cond) $20
-RB20 stock cam gears $40
-RB20 Green label AFM good condition (mesh still on both ends) $100
-RB20 front cam gear cover & t/belt cover $60
-RB20 top cam gear cover (painted in crinkle black paint) $40

RB25DET NEO
-RB25 neo stock injectors (370cc top feed high impedance) $100
-RB25 neo CAS $200
-RB25 neo TPS $70
-RB25 neo Stock coilpacks (good working condtion) set of 6 $200 or $40ea
-RB25 neo stock turbo manifold $70
-RB25 neo stock turbo water and oil lines $60
-RB25 neo stock turbo intake pipe $50
-RB25 neo stock head bolts $40
-RB25 neo viscous fan hub in good working codition $80
-RB25 neo stock cooling fan (trimmed to fit ic piping) $50
-RB25 neo wiring harness (missing a few plugs) $100
-RB25 neo stock throttlebody $70
-RB25 neo stock crossover pipe $30
-RB25 neo stock bov $50
-RB25 neo coilpack cover $40
-RB25 neo ecu Temp sender $30
-RB25 neo gauge temp sender $20
-RB25 neo stock Oil Filter block/warmer $100
-RB25 neo Thermostat housing $40
-RB25 neo Power steering pump and bracket $170
-RB25 neo AC compressor and bracket $150
-RB25 neo top cam gear cover $50
-RB25 neo Flywheel needs machining $50
-RB25 neo thermostat (good working cond) $20
-RB25 neo metal coolant lines (under plenum) $50
-RB25 neo stagea engine mount brackets $100
-RB25 RWD oil pickup $40


R32 GTST PARTS
-R32 genuine nissan clutch master cylinder (brand new never used) $100
-R32 Stock Rear Camber Arms $70
-R32 rear handbrake lines x2 (rear sections) $80
-R32 slotted front rotors (used but still life left in them) pair $80
-R32 standard rear rotors (used but still life left in them) pair $50
-R32 coolant overflow bottle lid $15
-R32/33 drivers side power window actuator (good working condition) $80
-R32 rear hicas rack (no tie rods) $70
-R32 rear hicas solenoid $30
-R32 Space Saver Spare Wheel in good condition $100
-R32 Standard Front Seats with rails pair $200 or $120ea

R32 GTR PARTS
-R32 rear ABS Actuators $70
-R32 rear handbrake lines x2 (rear sections) $80
-R32 Bare cradle with no arms $50
-R32 rear stock camber arms $50
-R32 rear traction arms $30


R34 GTT Parts
-R34 Engine mount brackets $100
-R34 Tail lights left and right $280
-R34 Fuel flap (needs painting) $50
-R34 standard Front sway bar (with good links) $50
-R34 Front castor arm mounts $70
-R34 Manual gearbox crossmember $70
-R34 Front reo bar complete (cut to fit intercooler, white in colour) $150
-R34 Charcoal canister $30
-R34 Bonnet support bar $50
-R34 Bonnet hinges $40

-R34 Front subframe bare $100
-R34 Stock front castor arms $70
-R34 Stock front camber arms $50
-R34 Stock front adjustable strut brace (rustyt, needs paint) $50
-R34 Cusco front coilovers base height adj (one leaking. good for parts) $70
-R34 Engine mounts $100
-R34 Front guards (small dent on one and wheel arch small bend, needs paint) $70
-R34 AC condensor and engine bay piping $200
-R34 dump back 3'' mild steel exhaust with decat and oval stainless rear muffler $100



MISC
-Z32 AFM PLUG $20
-Z32 AFM, pod filter and plug $170
-Genuine Bee R rev limiter $250
-Apexi power intake Air filter (genuine) brand new $80
-set of 6 bosch ev1 pigtail plugs $25
-SR20DET Fan clutch/hub $50
-RB26 Clutch fan in gd condition (fan + clutch) $100
-RB25 standard Gearbox shifter $50
-Blitz SBC Boost Solenoid $80
-HKS GTRS RB Turbo, comes with dump pipe to suit, braided feed lines, return line and elbow (in good working condition) $1400

Edited by freestyleMX

You wouldn't have R34 manual gear shifter surround by any chance?

No unfortunately I dont.

Thanks

How old is the Z32 AFM, & how much for just the Z32 AFM and plug?

Not sure on age, but is in good working condition, the filter is pretty much shot anyway but would want $170 for the lot still.

Thanks

  • 2 weeks later...

-R34 Cusco front coilovers base height adj (one leaking. good for parts) SOLD
-HKS GTRS RB Turbo, comes with dump pipe to suit, braided feed lines, return line and elbow (in good working condition) SOLD

-Z32 AFM, pod filter and plug SOLD


Also added

-Z32 AFM, pod adapter, K&N filter and plug $200

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...