Jump to content
SAU Community

Recommended Posts

So I got new rims and the guy said they would paint my brake callipers so I thought he would paint it red cause that's the colour people normally paint it. It got painted black which is nice but I think it'll look better in red, so how do I go about painting it? Should I just spray over it or what do I do to get the black off first? Thanks [emoji16]

Link to comment
https://www.sau.com.au/forums/topic/464442-brake-calliper-paint/
Share on other sites

Do not just paint over it!

If you're going to do it, do it properly. Jack up your car, take off your wheels and mask everything besides the calipers up (the quicker way as you're really ought to take the calipers off to paint them individually if you're willing to do it the absolute right way)...then you sand back the black paint, add 1-2 layers of primer paint and then paint over that with whatever paint colour you want but make sure it is heat resistant paint. That's it.

Painting over the current layer will probably make the paint thick and once the red flakes off over time you will see the black under coat.

Up to you how you do it though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...