Jump to content
SAU Community

EOI- Autospeed DIY Boost Control Kit

Bass Junky

By Bass Junky,
in Group Buys

 Share

Recommended Posts

Bass Junky Grand Master

Bass Junky

Posted
Posted

Hey ppls,

I going to make up for myself this weekend an Autospeed DIY Boost Control Kit which controls boost level and wastegate creep via two knobs.

I recieve very good prices from Pneumatics suppliers due to the industry I work in, so I'm wondering if anybody wants me to make them up a kit while I'm at it....

I wil figure out prices once I have price from my suppliers, and let you know, but right now I'm just feeling the water as to whether anybody would like one.

It will be on an aluminium bracket, with all parts required for simply plugging into your car, you may just have to extend some boost pressure lines, depending on where you mount the system.

You can read all about the system here http://autospeed.com/cms/A_0670/article.html

and it will have the extra valve from the second article also.

So, any takers?

BASS OUT

Link to comment
https://www.sau.com.au/forums/topic/46469-eoi-autospeed-diy-boost-control-kit/
Share on other sites
Bass Junky Grand Master

Bass Junky

Posted
  • Author
Posted

Okay, I've got prices back, and it looks like it going to be about $150 complete as you see it in the picture.

The little check valve is an expensive little sucker.

Kit will come complete and ready to bolt up.

You will only need to cut the hose and hook it up.

Please advise if you are interested so I can order parts.

I will have photos of my set-up after the weekend.

BASS OUT

Bass Junky Grand Master

Bass Junky

Posted
  • Author
Posted

Little side note.

I'm not making much is any money out of this.

I just figure that if I'm making one for myself, and I know another couple of people who want them, then I can help out.

BASS OUT

Essential Community Regular

Essential

Posted
Posted

Bass Junky,

I may be informed incorrectly, but this device is simply a bleed valve?

Im just trying to get my head aroudn what exactly it does, and how it works?

I found the article to not supply the information I was after.

Thanks,

Essential.

Bass Junky Grand Master

Bass Junky

Posted
  • Author
Posted

Okay,

The second valve is basically a bleed valve, but the first one is a valve which doesn't let the second one see any boost until a set pressure.

A 10 psi wastegate spring will be half open at 5 psi. If you stop the wastegate seeing any pressure until a set rate, you bring boost on much faster.

that's what this set up does.

BASS OUT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • S1_C34
      Stagea Front CV Axle Question

      By S1_C34 · Posted

      I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • TurboTapin
      CD009 RB Conversion

      By TurboTapin · Posted

      Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Nightmare_mistress_R33
      CD009 RB Conversion

      By Nightmare_mistress_R33 · Posted

      Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
×
×
  • Create New...