Jump to content
SAU Community

Recommended Posts

Adaptronic Ecu -
http://www.adaptronic.com.au/product/esel015/ Currently has the z32 map and harness plug, however the Z32 market isnt huge so I have spoken to Adaptronic who will change it to any nissan base map and plug for a small fee which I will cover depending on what sort of car you have. $1200 Lots of features as seen below. This is plug and play so no stuffing around with install costs.

 

Features:

  • Built in 4-bar MAP sensor to replace the factory airflow meter.
  • VE tuning to simplify injector upgrades and simplify staging
  • Easy to use software
  • Plugs into factory wiring
  • Compatible with many third party dashes and devices
  • Full closed loop operation
  • Flex fuel capable
  • Launch control, antilag, flat shift and boost by gear all standard
  • Semi sequential injection and wasted spark ignition
  • Spare 0-5V analogue input
  • On the GTR / R32, VVT output can be reassigned to a different function
  • One additional spare aux output
  • 3 spare digital inputs
  • Spare temperature input
  • Compatible with single and multi throttle body (for GTiR) tuning modes

 

SPECIAL FEATURES

  • This ECU also supports all the functions of the 440 ECU, however for advanced functions such as traction control, additional wiring and/or sensors will be necessary:
  • Flex fuel function – fill it up with gas/petrol or any ethanol concentration
  • Adaptive fuel control (self tuning) – reduces dyno time
  • Traction control function
  • Serial input for wideband O2 sensors (we recommend the MTXL)
  • Serial output for communication with dashes and dataloggers (we recommend the Race Technology units)
  • Headphone port for listening to the knock sensor while tuning
  • Basic closed loop ignition control
  • Closed loop fuel, idle, boost, 2 x variable valve timing control
  • Easy to use software
  • Dual maps (both maps required for GTiR for combined TPS / MAP tuning)
  • 4 weeks later...
  • 4 months later...

FYI, there are instructions in the manual on how to change this from Z32 to gtst and gtr. Very easy. Basemaps also free with the software download (also free)

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...