Jump to content
SAU Community

Recommended Posts

Hi guys so i have a highly modified rb26  with flex flew e85 and e93 octane fuel setup. using dynamic injectors. i start the car every week i don't drive it so i can keep up.

 how ever i had e85  in take low fuel,  i wormed it up  and i came to pull out the car  to load it on trailer.  and i drove around the  to get it on trailer i kind of floor it and died i figured out of fuel. no problem i got to the shop and put 93 octane( car is flex fuel tuned.) so i try to start it won't start  i have one pump in tank i check it is working and i have 2 bosch external and they are working. the fuel gauge  in front of the fuel rail  show pressures 60psi.  fuel rail got fuel. 

I pulled out the coil and there is no spark i pulled out the spark plug connected to coil tap on ground and no spark. 

also i looked in cylinder from  the plug whole and the injector is not spraying fuel.... :down:..    i the fuel pump is working but what can have went wrong.. 

for the records i am using AEM V2  ECU,  SINGLE TURBO, FLEX FUEL,  AND 3 FUEL PUMPS I NEVER HAD THAT ISSUE CAR WAS FINE TUNED AT 900WHP BUT I WASNT RACING OR LAUNCHING ... WTF....

 

Any help please

IMG_0104.JPG

Heaps of things to look at but check the trigger setup (is it aftermarket?). If the ECU isn't getting a signal it won't inject or spark. 

Do you have an immobiliser that cuts fuel/spark? Quite often a candidate. 

Good luck!

  • Like 1

thanks for the respond Ewan.  i never had issue with the factory immobiliser, and the trigger setup u mean CAS. Y  would it go wrong it was working fine  and how do i trouble shoot it and btw it is factory cas

How many filters have you got in the fuel system? Pull them out and if you can't clean them cut one open to see if its blocked. Does the pump prime when you turn the ignition on? 

Quickest test is to try another CAS if you have access to one. If not you might need a workshop manual to look up testing procedure, I don't remember if there is another way to test it other than with an oscilloscope.

The fact that you have fuel pressure but no injection plus no spark you need to look at what components restrict both from happening. Can you use your ECU software to look at outputs while cranking?

my tuner gonna come by monday to see if its a tune problem.  i have r32 gtr is cas the same? i tried its coil no spark so definitely not coil

 

No luck today so, check injectors with noid light no working how ever there is power on injector and coils but not ground.  How the hell I lose ground all the sudden???? 

So I checked ecu pin lay out ecu got ground alright but pin 20 It's called. B/Y ignition signal system ground.  It don't have ground any ideal where this one go to so I can better track it.

is this thing have a common relay module I need to know about.

please guys help me out here. 

Thanks 

 

Hi, Just looked up pin 20 on the AEM ECU  EMS P/N 30-6620. If this is your ECU then pin 20 is a ground. The ECU sends a ground signal to fire the injectors. No ground . No injection. Only if the part number of your ECU matches the one you have that is. Do not ground pin 20 unless your ECU part number is EMS P/N 30-6620. I need to know your exact ECU Part number to verify what your pin 20 is.

Ignition signal signal system ground could mean anything I need to have more info. If the Ignition system ground is missing then I would assume there would also be no spark as well as no injection and possibly no fuel pump running.

Michael.

  • Like 1

Thanks Michael,. So  I figured it out today thank god, here was the problem.   1). CAS got damaged over time  the shaft in it  and barring got pushed out cuzing the CAS disk to grind against sensor.  Fixed  that got ground ground no problem  how ever.  Fuel is spraying now but end up with no power to the ignition coils.  Checked the egnition relay  behind ecu ( under dash left side) but there is a thick White wire got no power when Cranking, so kept  diagnosting  there was another fuse. A 10 amp fuse  in trunk next to the battery  in small fuse box.  I changed it and everything is working now.  ? 

 

image.jpeg

image.jpeg

  • Like 2

Good to hear you found the problems and fixed them. It's  a good feeling when you solve problems that seem too difficult at first. Understanding how machines should work helps a lot. Never stop learning.

Michael.

Edited by msammut

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...