Jump to content
SAU Community

Recommended Posts

I can't seem to work out if a set of Rays LMGT2 17x9+16 with 255/40/17s  will fit on my R32GTR.

I've searched but can't find anything.

Has anyone fitted Rays LMGT2 17x9+16 on a R32GTR without rolling the guards? I'd like to avoid rolling them.

Any help will be appreciated 

Andy

Link to comment
https://www.sau.com.au/forums/topic/466411-rays-lmgt2-17x916-on-r32gtr/
Share on other sites

1 hour ago, djr81 said:

No I have +22's and without a lip roll and on r comp tyres (wider than road tyres for the same nominal width) they scrape.

16mm is an odd number - you sure it is correct?

Yeah the guy I'm getting them from said +16, what size tyres are you running?

Ive had conflicting info on if they'll fit. I might just have to roll the guards.

  • 2 months later...

Finally got around to putting these on my car
17x9+16 with 255/40/17 semi slicks fit with Tein Super Streets wound all the way down. There is only a slight difference in fit to my R34 GTR wheels with 255/35/18s.

The look heaps better will post photos after a wash.

[emoji106]?[emoji322]

Listen for scrapes at the back when you corner hard/hit a bump. I had +20s and they scraped at the the back with 255s. Since you'll have 4mm less gap you'll need to get the rear guards rolled.

It looks too high now but they fit, I think I'll roll the guards and drop it down at some point.

Sorry for the crap photos and dirty car but at least you get the idea.

Sweet

 

 

IMG_5452.JPG

IMG_5454.JPG

 

IMG_5458.JPG

IMG_5461.JPG

 

IMG_5464.JPG

 

 

 

 

 

Edited by andyseven
bad photos

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...