Jump to content
SAU Community

M35 aftermarket stuff

Philr32
 Share

Recommended Posts

Philr32 Proficient

Philr32

Posted
Posted

 

Hi guys just chucking it out there to see if there's any interest in some parts before I pull them out for no reason. Thinking of selling the following bits:

MCA Purple X-R coilovers

Scottys dump and front pipe, no cat.

Freeway dolphin 3" exhaust with cat inserted in the start. The muffler has a ding from the previous owners car being too low, doesn't effect flow and can't see it once it's on.

Evo 8 recaros in pretty good but not perfect condition, only bad thing is that one is missing the winder/adjuster knob. They have rails to suit M35 however the passenger side sits lower than the driver as they are different rails (drivers is bride and passenger is from scarlet performance, just a cheapy).

Thinking of selling these parts then selling the car stock.

Let me know below or inbox if there's any interest. Location is western Sydney.

I'll get photos of exhaust on the weekend if there's interest. All items are on/in the car and functioning.

34822f36ee5e4d20dc2d1b5d4524d2de.jpgbbbc9de75853a476d52fdace989365f5.jpg

 

Link to comment
https://www.sau.com.au/forums/topic/466904-m35-aftermarket-stuff/
Share on other sites
Philr32 Proficient

Philr32

Posted
  • Author
Posted

Bump, can't be bothered removing exhaust so it will be sold with the car.

Recaros and coilovers have been taken out ready for sale separately.

$1600 for the MCA coilovers

$750 for the seats with the rails, can do a bit cheaper without rails but prefer to sell together.

BIGZED Contributor

BIGZED

Posted
Posted (edited)

How does it ride on the XR's? 

Was eyeballing the XC's from MCA After being in a mates WRX race car on reds, but I love my cushy (allbeit knocky and completely knackered) Tiens. 

For the price I'd seriously consider your XR's if the ride is bearable on a softer bump setting

Edited by BIGZED
Philr32 Proficient

Philr32

Posted
  • Author
Posted

X-Rs are great, I was dailying it on the hardest settings, they're 18kg F 16Kg R. Hardest settings are probably too hard as a daily for most people but I think the swifter settings would be great for most people.

  • 2 weeks later...
Philr32 Proficient

Philr32

Posted
  • Author
Posted
I want complete exhaust how much? Happy to swap my std exhaust if u like let me know?
Cheers
Dave


I ended up selling exhaust with the car so I've only got coilovers left now.
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • uchoa
      Yet another RB Neo misfiring thread after reading all the others.

      By uchoa · Posted

      Good tips, will get on those tomorrow. When doing the maintenance I did move a few of those connectors around, and things that are old tend to not like moving around. (Like me).
    • GTSBoy
      Yet another RB Neo misfiring thread after reading all the others.

      By GTSBoy · Posted

      Don't try it. It will be shit. Better chance of damaging the engine than gaining any knowledge about the old one. Maybe, but unlikely, especially if the O2 sensor is working. You can use NissDataScan to look at the stock ECU.   Cleaning the AFM is seldom necessary and seldom helps. The R35 coil & loom conversion should eliminate dud coils or plugs. But as you still have misses - look to the plug where the coil loom connects to the engine loom, and the CAS plug. Need quality connections there. Also look to injector plugs. And the AFM plug while you're at it. Also look to whether your injectors are clean and flowing evenly. Get them out and onto a testbench.
    • uchoa
      Howdy from the states.

      By uchoa · Posted

      Good to know, I feel like I am in for a rollercoaster ride that looks like a sine wave. 
    • GTSBoy
      Howdy from the states.

      By GTSBoy · Posted

      You'll fit right in. Acceptance is the first step.
    • uchoa
      Yet another RB Neo misfiring thread after reading all the others.

      By uchoa · Posted

      Hey folks. I've been lurking and browsing the forum for a while, since I got into my head that I wanted a skyline. Having purchased an overpriced completely stock GTT, (only "mods" it has is HKS pod filter and catback) now that it became legal in the US, it was all glorious and sututu noises here and there. But then I wanted to do things right and went to do basic maintenance. After all the fluids, filters done, I did the spark plugs, that's when the problems started.. First the car started spluttering at around 4.5k RPM. Which I gapped down the new plugs and that solved the sputter there, but the car now always misfires at idle with pops when lifting off and shifting 2nd to 3rd. Similar to the issues in this recent thread. I've been banging my head against the wall, reading the threads here and trying suggestions for a couple months now, so decided to start this one to explain exactly what I tried and what is going on. The symptoms of the issue: Idle and low revs misfiring intermittently. You can hear the exhaust tone change and the shakes on the shifter knob. It happens frequently, but doesn't seem to have a rhythm to it. Pops when backing off throttle. It pops and or burbles almost feels like it spits fire when it pops. (Happens mostly in 3rd gear at around 2k RPM). When under load and after 6k RPM, it also pops when shifting from 2nd to 3rd. There's a ticking noise at around 2k RPM in 2nd gear going downhill, seems unrelated though but I am out of educated and downright dumb guesses. Not noticeable lack of power when putting the car into load. The attempted diagnosis and solutions: Unplugging coils when the car is running This did nothing to change the idling and tone shift for every cylinder. Checking the exhaust headers with thermometer They all are within what I'd say it is margin of error of the laser thermometer New spark plugs Tossed two new sets, copper, iridium and using the old ones, still misfiring, even re gapped to 0.8mm, still same thing. MAF cleaned with the "specific" spray cleaner No changes in the issues what so ever. Brand new loom and r35 coil conversion (was going to add the r35 coils anyway) car runs arguably better, still misfires, but seems like does less frequently. Placebo? Code 21 now being thrown, thanks nissan gods. Removed the CAS to check the shaft for play or anything. CAS seems all fine, nothing that indicates any issue, visually speaking. Things to attempted next: Ordered a new MAF (chinesium from Amazon, to be able to return regardless of result). Fuel with proper gas, maybe it is this California water that they sell as gas that is to blame? Plugin the link ECU and check the info using the built in base map. Go back to BMW and eat my rob bearing breakfast without milky oil mixture.   Do any of you have experienced anything like this or have any suggestion?
×
×
  • Create New...