Jump to content
SAU Community

R34 GTT Front Crank Worn - Some Advice

BlazenR34

By BlazenR34,
in Queensland

 Share

Recommended Posts

BlazenR34 Explorer

BlazenR34

Posted
Posted

R34 GTT Front Crank Worn - Some Advice

Hi everyone! I'm looking for some options and advice to a serious problem that occurred to me yesterday.

As you can see from the images below the front crank has been totally worn affecting the Harmonic Balancer and everything else etc effectively make the motor and car dead atm. My car has been extremely well looked after as with everything i own its just one of those devastating things that has happened as the mechanic has said and I still can't believe it. Car has done 130K.

I'm just feeling out the options as its essentially an engine rebuild and i'm doing career stuff overseas etc this is going to be extremely costly. Should i repair/rebuild/wield/sell/hold off any ideas and opinions are welcome.

Based on the Gold Coast, Tweed Heads so if anyone knows any advice on Skyline engine rebuilders as the mechanic shop it is currently residing at are not specialists in that area. They've been amazing to deal with as they have been for the whole time my car has been going there over the years.

Seriously gutted...

Thanks in advance everyone.

14632709_1799994426882282_1734670811_o.jpg

14699629_1799994463548945_448876541_o.jpg

14699396_1799994396882285_1790505862_o.jpg

Nissan_Skyline_Front.jpg

V28VX37 Veteran

V28VX37

Posted
Posted

Ouch man that sucks, pretty rotten luck! My car's at the workshop at the moment for a head gasket so I've been going through similar questions.

I think a rebuild is probably the most expensive option, especially if all you're after really is a stock engine. Lots and lots of labour plus the risk of missing something in the assembly, unless you pick a really good workshop.

I reckon an engine swap is probably the way to go. You'd probably be looking at around 2k for a second hand Neo and another 2k or so in labour (unless you have a friendly shop) so 4k-ish all up.

If you were to sell, it sounds like the car is currently pretty much a rolling shell so would be tough to get a fair price for it. This said if you don't need the money now but can't afford to rebuild/replace the engine one option is to just let it sit for a while if you have the storage – the way the prices are looking at the moment is pretty stable.

  • Like 1
BlazenR34 Explorer

BlazenR34

Posted
  • Author
Posted
2 hours ago, V28VX37 said:

Ouch man that sucks, pretty rotten luck! My car's at the workshop at the moment for a head gasket so I've been going through similar questions.

I think a rebuild is probably the most expensive option, especially if all you're after really is a stock engine. Lots and lots of labour plus the risk of missing something in the assembly, unless you pick a really good workshop.

I reckon an engine swap is probably the way to go. You'd probably be looking at around 2k for a second hand Neo and another 2k or so in labour (unless you have a friendly shop) so 4k-ish all up.

If you were to sell, it sounds like the car is currently pretty much a rolling shell so would be tough to get a fair price for it. This said if you don't need the money now but can't afford to rebuild/replace the engine one option is to just let it sit for a while if you have the storage – the way the prices are looking at the moment is pretty stable.

Thanks for the detailed reply man i really appreciate it and it helped. I just still don't know atm what to do! There will be a solution one way or another i guess!

Cadmoon Grand Master

Cadmoon

Posted
Posted

Few questions, what is your plan for the car?

A daily driven one? Then an engine swap will be the cheapest. You don't necessarily need to go to a shop for that, a few mates with a bit of know how can do it in a day.

A weekend car? Again an engine swap is the cheapest.

Big power one day? Then pull the engine and do a forged rebuild. 

 

BlazenR34 Explorer

BlazenR34

Posted
  • Author
Posted
20 hours ago, Cadmoon said:

Few questions, what is your plan for the car?

A daily driven one? Then an engine swap will be the cheapest. You don't necessarily need to go to a shop for that, a few mates with a bit of know how can do it in a day.

A weekend car? Again an engine swap is the cheapest.

Big power one day? Then pull the engine and do a forged rebuild. 

 

I'd say atm it's a daily driver but i'm on and off overseas.

So mate it's looking to be an engine swap.

I think a big power pull would be up to 10-15k which i can't justify atm. She has lots of mods as does most but still standard engine internals and turbo so she's extremely clean atm

I want to keep her for a weekend car in the future but i'm not sure what my future career stuff is. Whether its here or overseas which is why this couldn't have happened at a worst time! I'm at a crossroads for a lot things...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • JC71
      gtr hood match gt/gtt front fenders?

      By JC71 · Posted

      would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • TurboTapin
      boost source Size Garrett gt28 gen2

      By TurboTapin · Posted

      You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • QB6SAGR
      Battle of the broken skylines

      By QB6SAGR · Posted

      Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
×
×
  • Create New...