Jump to content
SAU Community

Recommended Posts

Hi Guys

I'm taking my car in to be tuned at the start of November, I'm thinking I will do injectors and Higher flowing Petrol pump But need some advice,

She already has the following

Return flow front mount

3" exhaust turbo back

K&N Panel Filter

Hi Flowed R34 Turbo

Yellow Jacket Coil Pack

Apexi Power FC

I figured the injectors and the pump would be the only thing holding it back from making good power?? Thoughts??

Link to comment
https://www.sau.com.au/forums/topic/467424-r33-gtst-s2-injector-advice/
Share on other sites

Depends on what kind of R34 highflow you have - who did it and what kind of power did they promise? Injectors and AFM will max out at roughly the same time so you could just go with what you have and get 220 - 230kw

What company is the receipt for the the high flow from? An upgraded fuel pump is a must. If your only going to use 98 unleaded, a hardwired walbro 255 will be fine. For E85, a hardwired  walbro 460 or DW300 will do the job. I would suggest some modern top feed injectors, 1000cc would be good for future head room and they still idle perfectly from what people say. Just stay away from cheap shit high flowed/re drilled junk injectors.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...