Jump to content
SAU Community

Recommended Posts

Tried a search but couldn't find what I was looking for.

My Xenons have been converted to halogen bulbs for compliance as with most 34s. One of the park lights(i think the one at the edge is the parker?) has gone and I need to replace it. I wanted to know what type of Halogen bulb I will need to buy to replace this and any suggestions on where to get these from?

Any specific tips for dissasembling the headlight would be great too. Thanks.

Link to comment
https://www.sau.com.au/forums/topic/46796-r34-halogen-bulbs/
Share on other sites

you should be able to take the globe out without taking the h/light apart . you can get the globe at any auto shop , take yours out and tested to make sure its the globe then buy one the same .

Link to comment
https://www.sau.com.au/forums/topic/46796-r34-halogen-bulbs/#findComment-949154
Share on other sites

hmmm, unless its one of those damn stupid 'sealed beam' headlights (i think thats what they are called)

when the compliance guy did my brothers type x 180sx, he changed the whole headlight, and its sealed, so u have to buy the whole thing, cant replace the bulb, as the whole headlight is vacuum sealed! i dont think thats what you have, but it not too difficult to spot how to take the bulb out.

Link to comment
https://www.sau.com.au/forums/topic/46796-r34-halogen-bulbs/#findComment-950491
Share on other sites

i've got h1 headlights on mine,, would so like some xenon headlights,,

anyways,, to get to the parker lights,,

u have to remove the battery or move it back atleast,, to get to the right parker light,,

some long nose plliers would help..

and to get to the left parker light,, you have to remove the intake box,,, should be bolted in 4 places,, and easy to get to.. also might have to remove the coolant reservoir tank,, 1 or 2 bolts i think,, than u can get to the parker lights easily.

the parker light sockets should be a twist on/ twist off plug,, twist left to unplug i think,,, thats if its the same parker lights as a H1 headlight..

either way, i think u'll have to remove all those things to get to the parker lights,,

hope it helps,,

AFRO

Link to comment
https://www.sau.com.au/forums/topic/46796-r34-halogen-bulbs/#findComment-953330
Share on other sites

Thanks. Any help is appreciated.

Just wanted to really know whether I would have to do some serious disassembly to get to the back of the bulb or not.

Just haven't got a lot of time to spend taking things apart and putting back together.

Link to comment
https://www.sau.com.au/forums/topic/46796-r34-halogen-bulbs/#findComment-953489
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...