Jump to content
SAU Community

Recommended Posts

Newb

Hi guys,
I'm a new member and thought I'd introduce myself. I'm Adz, live in Canberra. I'm the proud owner of a 1988 R31 GX Series II.
I have some pretty big plans for this car, and already have a few parts to add to it, thanks to my best mate. I'm basically aiming for the car to look like the second pic below! :)

My biggest issue at the moment is trying to determine what would be the best suspension conversion (other than s13) for the car being a dedicated track car (hillclimbs, sprints etc)
Any advice is appreciated.

Cheers :)

32024092816_c6aae050cd.jpg

31253810873_ca13870fc2.jpg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/468528-newb/
Share on other sites

i love a good 31 build.
welcome mate

 

i remember back in the day on the r31skylineclub forum there were coilover kits which you could weld the r31 hub to. these were the best option i saw when going through the motions. the S13 stuff worked but the highest settings were still very low.

 

**edit**

found it, Angrys kits.

https://www.facebook.com/pg/AngryIndustries/photos/?tab=album&album_id=115545405206002

 

Edited by GH05T
Link to comment
https://www.sau.com.au/forums/topic/468528-newb/#findComment-7803578
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...