Jump to content
SAU Community

Needing help wtb roof/window spoiler visor

NEA733

By NEA733,
in Exterior & Interior Styling

 Share

Recommended Posts

NEA733 Apprentice

NEA733

Posted
Posted

Needing help wtb roof/window spoiler visor

Hey guys I'm looking to get a roof rear window spoiler and I don't want a fibreglass one I've seen these visor ones on eBay for a 180sx and my mate first showed me when he bought one but they don't make them for an r33 gtst is there and other car with the same or really close to the rear window dimensions of an r33 the visor can move and fleas alittle bit so please help me out guys 

the first to pics is the fibreglass ones that I don't want and the last 2 are of the visor for the 180sx 

as you can see they are see though 

IMG_2830.PNG

IMG_2831.PNG

IMG_2832.PNG

IMG_2833.PNG

NEA733 Apprentice

NEA733

Posted
  • Author
Posted
12 hours ago, niZmO_Man said:

Holy crap, construct your sentences properly.

I'm not sure what you're asking, but look on alibaba for R33 body bits.

Really mate you are on me because of my punctuation sorry there are people out there that my not be as educated as you are and have trouble with writing a sentence and never post or write because of people like you that make them fell like absolute shit and you are the reason So really thank you for shitting on me and my confidence in communicating with forums and people it's really appreciated

really if you can't understand what I'm wanting help with seriously reconsider the life you have chosen as you are a moderator on a website So if you can't be nice don't say anything at all  (remember when ya mum probably said that to you when you were younger)

im sorry I'm not up to your standards mate but that's a really shitty thing to do to someone so please don't mention or answer any of my posts or questions again 

seriously it a forum not a f**kin formal letter to the president of punctuation island so get over yourself buddy as 

 

 

niZmO_Man Grand Master

niZmO_Man

Posted
Posted

Your period and comma keys must be broken on your phone. Yes I'm a mod, and I try to help out, but if I can't read posts properly, helping out becomes harder.

If you think my post was demeaning, well then you're going to have a bad time on the Internet. Notice how I didn't mention standards and education? It's advice buddy. Sadly your phone keyboard doesn't construct sentences (yet), but voice typing should be able to.

You're not on Whatsapp or Instagram. You have time to think about what you want to ask and type it out, there's no rush buddy.

So have you looked on ali baba yet or do you need links?

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...