Jump to content
SAU Community

Recommended Posts

hi all,

I'd like to ask about the auction rating system in Japan, a lot of the time it is said that the car is 4.0 or 3.5 . what do those figure mean and what are they looking for when stating that.

also what are those H13, S55.....etc rating, they seem to have something to do with the cars age , but i couldnt find any logic to it.

sorry for asking here, but babelfish and the others are banned by my isp, no way to figure out what is written there for the time being.

Link to comment
https://www.sau.com.au/forums/topic/46908-japan-suction-system/
Share on other sites

The auction grade 1 to 5 is:

(1) High mileage, rough, damaged many owners poor mechanical condition.

(2) Poor condition in need of attention in both bodywork and mechanical defects

(3) Fair condition for age reasonably well maintained some miner faults.

(3.5)Good condition very few minor faults. Road worthy.

(4) One owner low mileage well serviced cars above average condition for year.

(4.5) Very good condition, mint cars for year, nearly new.

(5) As new. Showroom condition.

And H7, S51 etc is referring to the Japanese year counting system, according to the Emporer that is reigning at the time... "It was decided that each Emperors reign would constitute an era. The year in which an Emperor ascended to the throne would be the first year of a new era which would continue until his death.":

S = "Showa" (the name chosen for the period, not the Emporers personal name - "Hirohito")

S1 = the first year of the Showa period (1926) continued on through to S63 (1988)

H = "Heisei" (the current period we are in now)

H1 = the first year of the Heisei period (1989) continuing through to now, which is H16 (2004)

So the years you should be interested in are these:

S60 = 1985

S61 = 1986

S62 = 1987

S63 = 1988

H1 = 1989

H2 = 1990

H3 = 1991

H4 = 1992

H5 = 1993

H6 = 1994

H7 = 1995

H8 = 1996

H9 = 1997

H10 = 1998

H11 = 1999

H12 = 2000

H13 = 2001

H14 = 2002

H15 = 2003

H16 = 2004

I got all the auction grade info from a 2 minute Google search...

. :

Justin, different Auctions have different grading systems...but they are pretty much relative.

Most work off a 1-10 scale...

10-Brand new car, 0 klms mileage, no scratches.

9-under 3 months old, has traveled less than 500 klms, like a new car.

8-under 6 months old, has traveled less than 1,000 klms, like a new car.

7-under 1 year old, has traveled less than 10,000 klms, like a new car (both inside and outside).

6-both inside and outside are good condition, standard mileage, may need slight repair.

5-

1. as same as 6 grade with slight repair.

2. metal plate , already painted. Well repaired, Inside and outside is upper average condition.

4.5-any age, bodywork is good, will be 5 grade with slight repair.

4-any age, mileage, with trace of repair, not repaired properly, need to repair again and the condition will be good enough for retail exhibit.

3.5-any age, mileage, need to repaired again in a part (corrosion, repaired trace). may have repaired trace in back panel and front buffer.

3-inside condition is bad, lots of rust & corrosion on exterior, the condition of repaired metal panels may be bad. Slightly damaged car (inner roof repaired, trunk floor repaired), colour changed car, unclear colour, damaged by sea air, etc.

2-car complete badly corroded, valueless.

1-inferior car, basically not exhibit.

A-accident car with slight damage.

B-accident car.

---

Most good cars at the auction will be 4, 4.5 or 5 with reasonable mileage, and whatever you buy...nothing lower then 3.5!

Oh and mazinger...please tell me what is Japanese suction system, is that some sort of Japanese massage :)

Justin, different Auctions have different grading systems...but they are pretty much relative.
I've only ever seen the 1 -5 gradings on Auction sheets... strange man, they must be grading tightasses or something... :rofl:
Oh and mazinger...please tell me what is Japanese suction system, is that some sort of Japanese massage :D
Bwahahahahaha! :rolleyes: nah Troy, thats the JP-Drivers license course... 25,000 yen for the tests/lessons/paperwork, 275,000 yen into JAF.
Evo_Lee: i haven't seen any auction sites with the 1-10 system, almost all use the 1-5.

and its not my fault Acer puts the "A" so close to the "S", hence the new name "suction"

weired thing is that i could not edit the topic???

Really, I have only worked with 10 grading levels and my car was also bought and graded at 4.5.

Justin, yeah 10 seem to be more strict. Mine is a 4.5: 3 yo at the time, 43000km, no damage history, minor exterior scratches...very close to a 5.

I also was very close to buying their dedicated 400ps STi track car with dog box, no interior and roll cage...just like Steve's STi.

funkymonkey: you can always use one of those to take the dents outta your car :wassup:

plunger.jpg

seriously , my freind uses it to take a big dent at the rear. it looks ok for a few hours or so, but then goes back to normal.

and Evo_Lee: you'r better off with a EVO, the older ones. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • New CAS just turned up from NZ Wiring. Looks like a nice bit of gear.  So, yeah. Triggered, bro. Realised I may as well do the cam belt while mucking about with it so will order one of them.
    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
×
×
  • Create New...