Jump to content
SAU Community

Recommended Posts

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Just got off phone from NISSAN, 93-2/96 was a option on Turbo coupe.

Now we are talking Turbo and we are talking coupe.

2/96-end of production ABS is standard equip.

information taken from Nissan Japan spare parts computer

Now I have only seen turbo coupes 2/96 with ABS. never without.

I only go by official nissan information, and thats what I pass on to the people on this forum.

I do not listen to anybody at auctions or brokers in Japan, in fact I don't buy from them, I don't trust any of them

I think you could both be right.

I had a look on the http://imports.motortraders.net.au/ site (formerly japimportcar.com) and it lists two model variants for series 2 r33 gts25ts (manual, coupe). The first 1996-1997 has ABS as an option, and the second 1997-1998 has ABS as standard.

So it could be that only the late model series 2 have ABS standard and the earlier series 2 ones don't.

I guess I have to repeat what I said.

ALL MY INFORMATION IS FROM NISSAN

they are the people that build the cars we are talking about.

I don't think japimportcar.com would know more than NISSAN JAPAN. in fact I don't think anybody would no more than them!!!

If it doesn't have ABS and the build date is later than 2/96 then its NOT ORIGINAL. (FACT)

If you disagree then ring Nissan Japan.

Sure MR-GTR.. but the person who you spoke to at Nissan did not build the cars.. perhaps he just looked up the one model variant (later series 2) and gave you that info.

How do you suggest that there are so many series 2's without ABS? Are people removing it or what?

I hardly think 50% of them have gone out and done a series 2 conversion on their series 1 .. and changed the interior too? =)

I know all GTS-4 has ABS on them...

I should count my self lucky...

I thought ABS was factory option to all series II! .. I guess not:rolleyes:

anyway Just becareful on the road and hope you dont have to use ABS...

maybe ABS is good thing to have BUT it can be really annoying on the track...

cheers

Joe

ok people, the truth has come out, I've got the original skyline series II japanese catalogue right here in front of me and its says quite clearly (well its in japanese but you could work out) that the gts25t type M with active LSD (which is a seperate model by itself) and the gts-4 are the only ones with standard ABS. the rest which include the type M specII and the spec I and all the nonturbo versions have it as an option

I guess the guy at Nissan is a idiot, I was unlucky to get such an incompitant fool, I will get him to ring you for any information he needs. or maybe he can call your suppliers direct, it will make it so easy for Nissan japan to source such accurate information ,

I am sorry to have questioned your experience in Skylines.

Can your suppliers get me some of these genuine cars too, all these years Ive been relying on Nissan , I should have listened to all those aussie, kiwi, canadian, paki, indian,and shri lankin car brokers living in Japan, all hanging around the scrap yards and auctions, Over the past 9 years I've lost so many honest genuine deals. I should have just purchased over the net like most here,

I'm crushed , I won't sleep tonight.

Well I've been back to Nissan again, series 2 was released in Oct 95 officially, as from 2/96 all series 2 33 turbo skylines were fitted standard with ABS.

Prior to 2/96 it was a option on all 33 version cars.

like I said from my first input on this

from 2/96 all 33 skylines were fitted with ABS, the brochure was printed prior to 2/96. this is official from Nissan

Yes your correct I suppose, it was you instant who said 33 all had ABS standard, I agree with you as I personally have never seen a Turbo series 2 without ABS, I contacted Nissan to find out the truth from them , I guess some people don't want to find the truth.

But this I do know for sure !!!!! there are a lot of non genuine supposibly "genuine" cars out there, give me your chassis no and model number and I'll find the truth for you. IF YOUR NOT AFFRAID OF THE TRUTH. I can also find how many owners its had and where it was sold and where it lived in japan , also 80% of Skyline imports are purchased from the "accident repair section" of the auctions.

in the end I guess as long as your happy with it then thats what counts.

Originally posted by MR-GTR

Yes your correct I suppose, it was you instant who said 33 all had ABS standard, I agree with you as I personally have never seen a Turbo series 2 without ABS, I contacted Nissan to find out the truth  from them , I guess some people don't want to find the truth.  

But this I do know for sure !!!!! there are a lot of non genuine supposibly "genuine" cars out there, give me your chassis no and model number and I'll find the truth for you. IF YOUR NOT AFFRAID OF THE TRUTH. I can also find how many owners its had and where it was sold and where it lived in japan , also 80% of Skyline imports are purchased from the "accident repair section" of the auctions.  

in the end I guess  as long as your happy with it then thats what counts.

its INASNT mate not INSTANT!

I just stated that i THOUGHT they had ABS standard!

I am gonna check my chassis number so u can trace where it came from! it would b interesting to see if u r correct as i already know its origins

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Should be more than fine, especially the overall fuel pressure would never exceed 3.5bar (assuming that thing never gets more than 0.5bar of boost in stock form). According to the chart, it's 11amps.
    • I definitely know the first rule here, look first, ask second. I've seen many people get roasted 😂 I found a few diagrams for the RB, but I'm yet to come across one for the VQ. From what I have read, the pump gets the +12v along with the FPCM, and it's the negative wire that gets passed through the resistor to regulate the voltage. So I assume I can just ground the negative wire at the pump to eliminate the FPCM control. But I really wanted to see the VQ circuit diagram first to make sure I understood it correctly. Once the new pump is in I'll do some testing to see how it behaves, and in the meantime, I'll keep looking for a wiring diagram. Thanks for your help mate, your time is greatly appreciated.    
    • Maybe? I have the Supercheap ToolPro low thingo. It has a somewhat smaller diameter lifting "bowl" than you would expect on a workshop grade trolley jack, and a split rubber pad to suit that diameter. It clears the "N1" style skirts I have. Probably wouldn't if the jack's bowl and a suitably larger rubber block were in use. Having said that though.....you only need the rubber block to exist on the inner side of the pinchweld, so could carve away any rubber that fouled the skirt, leaving some there for "insurance" </simples>
    • I used to do that (sills with rubber jack block).. ... then I got side skirts, and there's no way for the jack to actually work there, the jack pad itself on the jack is too big. Is the answer to use a... smaller (?) jack? Hmmm.
    • I have too much trauma from every skyline I've ever seen having crushed jack points/pinch welds lol.    Yep, works 100%, it's what I use when I'm using the quick jack. Don't know why I can't also bring myself to do the same thing when I'm using a jack. I blame the skyline PTSD. 
×
×
  • Create New...