Jump to content
SAU Community

Recommended Posts

Well, had fun yesterday and trying to work out what caused it. Going round the rounadabout near adfa onto Monaro H'Way in the wet, doing about 20 or 30kph, accelerated out like a granny and the rearend just stepped out and kept me spinning to the right. Managed to catch it in time, corrected and came to a stop facing back to the left and the right way for heading up the h'way before getting into the way of oncoming traffic but got me wondering what I did wrong.

Since I haven't driven a rwd or an lsd car for about 15 year I think it might just be needing to readjust to the handling, and checking if the tyres are running low on tread, but thought I'd see if this might be a common issue in the wet that just needs awareness of or if it might be a handling issue.....or if I just screwed up :D

Link to comment
https://www.sau.com.au/forums/topic/47068-first-lose/
Share on other sites

yeah what nick said, im the same, my fronts are low on tread and i have to be very carefull cornering in the wet, except it always trys to understeer not oversteer. but as long as im carefull and slow it holds fine, not exactly a smart idea on my part driving on low fronts though.

you'll get used to it though, and you'll know its limits in the wet.

Link to comment
https://www.sau.com.au/forums/topic/47068-first-lose/#findComment-952439
Share on other sites

I had some slips in the rain when I first got my car, came from a FWD. Also if it hasn't rained for a while the roads are very greasy but this washes away once it's been raining for a bit, like all day kind of thing.

You do get used to it though, I always turn Traction Control off an dhave no problems.

Link to comment
https://www.sau.com.au/forums/topic/47068-first-lose/#findComment-952450
Share on other sites

r33's have crap diffs, they open wheel offen then go to and fro into 2 wheel slip which can be hard to cantrol and very unpredictable and quick to step out... if you find this is the case i recommend a mechanical 1.5 locked lsd she'll do exactly the same thing everytime!!!!

Link to comment
https://www.sau.com.au/forums/topic/47068-first-lose/#findComment-952497
Share on other sites

yea happened to me only last weekend but not on a around about this was just coming out of a sharpish corner scared the bagesus out of me and i wasnt being a tool either. the learning process for me is pretty high but i think i have a pretty good idea now of its basic limitations. plus i intend on going to a skidpan to find out what its really like.

Link to comment
https://www.sau.com.au/forums/topic/47068-first-lose/#findComment-953202
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I will rebutt this and the preceding point from Dose....but without doing any calcs to demonstrate anything and without knowing that I am right or wrong. But... The flow capacity of a fluid transfer system is not limited by the smallest orifice or section of conduit in that system, unless it is drastically smaller than the rest of the system. OK, I use the word drastically perhaps with too much emphasis, but let's drill down on what I really mean. The flow capacity of the system is the result of the sum of the restrictions of the entire system. So, to make an extreme example, if you have a network with 3" pipe everywhere (and let's say a total length of only a few metres) and that 12mm ID restriction of the oil filter connection being the obvious restriction, then for any given amount of pressure available, the vast majority of all the pressure drop in the system is going to occur in the 12mm restriction. But.... increase the length of the 3" pipeline to, say 1000m, and suddenly the pipe pressure loss will likely add up to either be in the same order of magnitude, possibly even exceeding that of the 12mm restriction. Now the 12mm restriction starts to matter less. Translate this to the actual engine, actual oil cooler hose sizing, etc etc, and perhaps: The pressure loss caused by flowing through the narrow section (being the 12mm oil filter port, and perhaps any internal engine oil flow pathways associated with it) is a certain number. The pressure loss through, say, -12 hoses out to the cooler and back is negligible, but The pressure loss through -10 hoses out to the cooler, at the exact same length as the above, starts to become a decent fraction of the loss through the 12mm stuff at the filter port. Maybe even it starts to exceed it. I could actually do these calcs if I knew 1) how much oil was actually flowing in the line, 2) gave enough of a f**k to do things that I hate doing for work, voluntarily for a hypothetical discussion. Anyway - I reiterate. It's not the narrowest port that necessarily determines how much it can all flow. It is the sum. A long enough length of seemingly fat enough pipe can still cause more loss than a semmingly dominant small bore restriction.
    • To pick up what Dose is putting down. Not a lot of point running a huge hose if the motor is still restricted to the smaller size... It's only capable of flowing so much at that point...   *Waits for GTSBoy to come in and bring in the technicalities of length of pipe, and additional restriction from wall friction etc etc*
    • Hooley Dooley these things have some history! If i sell them they will need a certificate of providence to prove they have been in the hands of verified RB20 royalty! They have been stored in a plastic tub, away from sunlight and moisture. They are in mint condition. And they will stay that way, as i have sprung the money for a set of shockworks coilovers. I'm just working on getting them in at the moment, after rebushing the rear of the car, and while the subframe was out i welded in the GKtech reinforcement bracing as well.  They will get a workout at Ararat King of The Hill in November. I ran 48s on the short course there a few months ago, and i am hoping with new bushes and shocks in the rear i can launch a bit harder. There was a fair bit of axle tramp when i tried too hard off the line. a few of the corners had dips mid way which also made the car feel a bit unsettled, hopefully this will help there too.   
    • Food for thought, the stock oil filter thread is a 3/4-16 UNF, which has an ID of about 10 to 12mm (according to ChatGPT lol). Now compare than to an 10AN, which has an ID of about 14mm (Raceworks is 14.2mm, Speed flow is 14.27mm).  
    • Yep, totally get that. However hooking in for Generator back up is only a few hundred bucks for the wiring. You could put a couple of those in (for different circuits explicitly) and run a couple of baby generators. Bonus, you can balance them across different circuits, and now have backups in your backup. I'm looking at buying places that won't even have water etc, and I don't mind the idea of getting off the electric grid either, even with everything you've said. This country already has enough power outages that even the mains grid isn't that reliable anymore. I do agree though on spending a bit more to get better gear, and to add some extra redundancy in to the system too.
×
×
  • Create New...