Jump to content
SAU Community

Recommended Posts

 

Aeroflow silver braided fuel lines front -8 to back -6 with aeroflow surge tank with two 044s $850

R34 gtr abs unit no leaks brake master and lines included $450

R32 Gtr plenum with large single hale racing throttle body ,deleted itbs with nitto gaskets and alloy intercooler pipes for both sides which suit this plenum $350

R32 gtr 3 1/4 or 1/2 inch exhaust system $350

R32 gtr fenix alloy radiator with thermo fans $300

R34 gtr crank angle sensor $300

R32 gtr abs unit no leaks brake master ,brake lines included $250

R34 gtr braided brake lines $200

R32 gtr crank angle sensor $150

R32 gtr strut brace $100

R32 gtr alternator no front pulley $100

R34 gtr hicas rack $100

R34 gtr factory map sensor $100

Rb26 bottom timing cover $50

Rb26 dipstick $50

 

 

IMG_1723.jpgIMG_1725.jpgIMG_1728.jpgIMG_1730.jpgIMG_1731.jpgIMG_1732.jpgIMG_1734.jpgIMG_1726.jpgIMG_1724.jpgIMG_1722.jpgIMG_1741.jpgIMG_1736.jpg

 

Link to comment
https://www.sau.com.au/forums/topic/471214-gtr-parts/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 4 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...