Jump to content
SAU Community

Recommended Posts

Hi all,

 

I'm after some help.

 

I'm putting spacers on my 33 GTR.

 

I measured from the tyre to flush with the outside of the guard.

 

It was around 35mm on the rear (stock 17s) so I got 30mm hubcentric spacers.

 

Tyres are now hanging out of the guard around 10mm.

 

Where am I going wrong?

 

Dan.

Link to comment
https://www.sau.com.au/forums/topic/471674-r33-gtr-wheel-spacers/
Share on other sites

On 17/08/2017 at 9:03 PM, Lin33r said:

Am I measuring for offset correctly?

Your method sounds ok so long as you are measuring with the car on the ground both times. Take the wheel and the spacer off. Check that the spacer is 30mm (measure its thickness). Put the wheel back on and drop the car to the ground. Re measure the distance to where you want the wheel to be (flush with the guard, or just inside it).

BTW make sure that if your wheel studs stick out past the spacer that there is an appropriate place for them to go into the wheel..and that you have used the special flush spacer nuts...i.e. check that the wheel is seating flush on the spacer and not on the wheel studs or the nuts.

10 hours ago, KiwiRS4T said:

BTW make sure that if your wheel studs stick out past the spacer that there is an appropriate place for them to go into the wheel..and that you have used the special flush spacer nuts...i.e. check that the wheel is seating flush on the spacer and not on the wheel studs or the nuts.

Betting this is where it's going wrong.

5 hours ago, Lin33r said:

Spacers are flush onto hub. I am completely baffled.
Anyone out there ever put spacers on stock R33 GTR wheels?

Hundreds of people. Its not rocket science. Start again. Pull the wheel and spacer off. Put the wheel back on. Measure the distance to the desired position relative to the guard (after you have dropped the car and driven a few metres to ensure its back to normal) and that is the required thickness of the spacer. Measure the spacer that you have. Are the wheels flush on the spacer? As above, take some pics before, after, and just after you fit the spacer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...