Jump to content
SAU Community

WTB 32 GTR

FF GTR

By FF GTR,
in Wanted to Buy

 Share

Recommended Posts

FF GTR Rookie

FF GTR

Posted
Posted

Hey guys

As title says looking for a 32 GTR, been looking for a while but haven’t had Much luck

After a street registered car with minimal/ no rust, not fussed about the color or mods. Would also be interested in a project or shell which is clean but missing driveline. 

Would prefur to be located in SA but am willing to travel, budget of 30k

 

 

Link to comment
https://www.sau.com.au/forums/topic/473036-wtb-32-gtr/
Share on other sites
rb30gtr Mentor

rb30gtr

Posted
Posted

Be a tough search at 30k! Any I looked at around that price were more rust than chassis rails! If budget is firm @30 I'd say look for projects or import a crashed gtr that needs slight cosmetic repairs. There's a rusty project in nsw in the 20s and I met one guy on the r32 gtr facebook owners page who has a gtr that needs a full respray that might fit your budget.

Link to comment
https://www.sau.com.au/forums/topic/473036-wtb-32-gtr/#findComment-7864296
Share on other sites
FF GTR Rookie

FF GTR

Posted
  • Author
Posted

Yea there’s not much around that isn’t rusty somewhere but trying to get best I can get. Budget is pretty firm so am mainly looking for a project or something that needs work done. Will send you a PM about that ones that needs a respray

Link to comment
https://www.sau.com.au/forums/topic/473036-wtb-32-gtr/#findComment-7864352
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...