Jump to content
SAU Community

Recommended Posts

Hi all,

Looking to sell my 370gt type SP in 6 speed manual which I have had for the past 3 years, need to get something with 4 doors.

This car to my knowledge is the only one in Australia (correct me if I'm wrong) that has had a full english swap for the command centre. This has been achieved using factory Nissan parts, all functions work perfectly including the Navigation which has all Australian maps. This also supports Bluetooth streaming and also has an additional USB cable in the centre console.

It currently has 140, 000 genuine kilometres on the odometer and has not given me a single problem in the 3 years of ownership. The only mod that it has is a Xforce catback exhaust.

There are a few imperfections that I will point out, all the wheels have bad gutter rash on them but were like that when I bought the car. There is also a few scratches on the front right bumper that you can just see in one of the pictures but other than that it is in fantastic condition.

I also have a spare brand new from Nissan blank surround for the steering wheel that has not been fitted to replace the current one that has worn away.

Looking for $23,000 which I think is a fair asking price seeing that it is unique to the fact that it has had a complete conversion to english and is a rare manual.

Open to offers, but not in any rush to sell whatsoever.

Located in Sydney's south west.

If interested PM me or text on 0414 303 233

Thanks

Joe

IMG_20180407_155827.thumb.jpg.20d426deec797c84bdd4fedc151467ac.jpgIMG_20180407_155839.thumb.jpg.44868b705d0f867e9e6a9b1c5dc08d24.jpgIMG_20180407_155855.thumb.jpg.6cb0a672d39c9422bee6fc328fa03eeb.jpgIMG_20180407_155916.thumb.jpg.cb1731d80f69941af1591c01a36b51bf.jpgIMG_20180407_155938.thumb.jpg.282623db95a390d860120b157732f96b.jpg

Edited by FUMIN
  • Like 1
  • 2 weeks later...
  • 4 weeks later...
  • 4 weeks later...
  • 3 weeks later...
  • 1 month later...
  • 2 weeks later...

hey, i feel your pain, i've have mine for sale for a while and it's only a 60.000km car but i'm fortunate that i don't have to sell, i'd sooner leave it in the shed than give it away, people just don't know class ?

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
    • Well, I had an Edward Lee's special edition odo windback car/motor with a RB25DET S2 and I put down 372kW with a good amount of track abuse for 1.5 years before the ring lands decided it didn't want to stick around anymore 🥲 But probably didn't help I kept on smashing try limiter on the track and a few skid pans.
×
×
  • Create New...