Jump to content
SAU Community

Aftermarket LSD question

Chris32
 Share

Recommended Posts

Chris32 Veteran

Chris32

Posted
Posted

G'day chaps,

quick question - my diff is whining and getting a little clunky, looking to replace it. I can get a good stock diff for $250, or thinking of going to a mechanical LSD

Thought about getting a GTR diff, but too hard for me as it invloves swapping alot of parts. Does anyone know anywhere that has one available for R32 GTSt?

Also how do you tell between a aftermarket mech. LSD and a stocker? A few wreckers I have spoken too don't know how to tell the differance, and i am thinking if I can go and have a look, I may be able to pick up a bargain

Regards, Chris

Link to comment
https://www.sau.com.au/forums/topic/47429-aftermarket-lsd-question/
Share on other sites
Bl4cK32 Grand Master

Bl4cK32

Posted
Posted

Best way i can tell you about it is to look here : www.cusco.co.jp/english/e_lsd.html

I think from memory Mist (another user on this forum) had a Nismo Pro lsd 2 way kit (brand new in box, with gaskets and oil) I think the kit allowed adjustment for the 2 way as well....i was going to grab it, but lack of funds (have to get turbo & new manifold)

He was letting it go for $1850? i think....damn great buy if you ask me for a new kit already here in Aussie.

Steve did explain before...i think its the shape of cross shaft???...might have to do a search myself :(

Bl4cK32 Grand Master

Bl4cK32

Posted
Posted

Steves explanation

"In the diff centre, there is a key that will be different shapes. It works by pushing plates apart, that causes the clutches to engage. The 1 way will be like a triangle, 1.5 way will be like 2 triangles, but one side will be truncated, and a 2 way will be like two triangles with their bases together (like a square on its side)"
Sorry Steve if i butchered your quote :(
Chris32 Veteran

Chris32

Posted
  • Author
Posted

I pulled that of the UAS site, its a modded 33 diff, but if someone could tell if it looked stock or aftermarket it would be a huge help

Hows the diff in your car? is it noisy?

Chris32 Veteran

Chris32

Posted
  • Author
Posted

yeah mine is dying slowly, open wheels a bit no and then, crunchy in reverse and clunky in forward gears, so looking for a upgrade

Anyone know if a 33 GTS25T diff would bolt in?

Steve Grand Master

Steve

Posted
Posted

the 33 diff is different ratio, 4.11 vs 4.3x in the 32. Not sure if they would bolt in, but the 33 diff also fits S14 if that is any indication. If its mechanical, you can remove the centre and fit it anyways.

The diff in the photo looks pretty stock to me, have a look on the cusco site for diagrams of how mechanical diffs work.

If the diff is still in its housing, try turning both ends. A viscous diff, you will be able to turn each side of the output ends in opposite direction, a mechanical diff - not a hope in hell. Its easier if its still on the car, then you just jack up one side and try to turn the wheel. If the wheel turns (once again, with some resistance) it is not mechanical, if its almost impossible to turn, but when it does it clunks (slips a little then holds again), most likely a mechanical diff.

Best way though is to pull the back cover off and have a look for the 'keyway' sort of thing :( as per the cusco site. Definately do this if you think you may have found a mechanical diff.

hope that helps

Chris32 Veteran

Chris32

Posted
  • Author
Posted

cheers mate, will have a look at a few and see if I can spot one that is not a stockie :(

So say the diff is on the ground, by itself, and I twist each side (where the axles bolt up) in the oposite direction, the stock lsd will allow this quite easily, while a mech. lsd will not allow you to do this?

Clint32 Mentor

Clint32

Posted
Posted

yeah the viscus std diff will be tight but you will depending on how worn it is be able to twist eash side independenly and smooth, a mechanical will be rough and tight.

33 diff wont fit in 32 but all centres are interchangable.

S13 diffs bolt in and if you find one with a 6 bolt(3 pairs) flange for the driveshafts then you can use s13 shafts which are the smae lange and trade yours in

Roy Grand Master

Roy

Posted
Posted
you could get your stock one and shim it up.

it'll work much the same.

Thats what im getting done to my tired (stock) LSD.

It'll come up close to what a mech would be like, but much cheaper

SOLD...only tell me the name of the place where you are getting it done so i can drop my car over to the free spinning piece of crap re-shimmed :)

GTRgeoff Grand Master

GTRgeoff

Posted
Posted

That one in the pic looks like a viscous out of a 33, which I understand are unrepairable from my enquiries. I'm just hoping mine is helical so I can get away with getting it shimmed. Post price if anyone gets it done.

Chris32 Veteran

Chris32

Posted
  • Author
Posted
you could get your stock one and shim it up.

it'll work much the same.

Thats what im getting done to my tired (stock) LSD.

It'll come up close to what a mech would be like, but much cheaper

I have heard many people mention this, but have never heard of anyone getting it done. If you do, please let all of us know!!!!!!!1 :)

Cheers for all of the replys

Chris

Chris32 Veteran

Chris32

Posted
  • Author
Posted
S13 diffs bolt in and if you find one with a 6 bolt(3 pairs) flange for the driveshafts then you can use s13 shafts which are the smae lange and trade yours in

Clint, how sure are you that a S13 diff will bolt in? They are much easier to come across than a aftermarket diff for a R32! So if I find a S13 mech. diff, I'd just need the drive shafts form a S13, and then it would all bolt in?

Cheers, Chris

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
SOLD...only tell me the name of the place where you are getting it done so i can drop my car over to the free spinning piece of crap re-shimmed :(

Im getting mine done while my car is in for a rebuild.

Ben @ Racepace is doing mine, i've got another 2nd hand LSD and he is just gonna use what he can to shim it right up.

Im sure there are many other places that can do the came thing surely

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Hendasto
      Lets play a game - What is causing my oil consumption?

      By Hendasto · Posted

      Hopefully it ends up being something manageable, like a hone, rather than a full bore—it would be a huge relief if it’s not as bad as it looks. Hang in there; these setbacks are annoying, but it sounds like you’re handling it as smartly as possible.
    • Hendasto
      Are RBs worth building reliability wise

      By Hendasto · Posted

      At the end of the day, it’s all about understanding the odds and being comfortable with the potential cost, whether it’s horsepower on a build or chips on a roulette table. And I have to say, the Laine example made me laugh—some people really do embrace that carefree, “roll and see” attitude!
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks GTSBoy, i will do abit more digging. I am missing a blue relay near the ECU connector... so i will chase that up in the next few days as well  
    • MBS206
      New kid on the block

      By MBS206 · Posted

      https://yariksteel.ru/manual/R33/Skyline_R33_elektroprovodka.pdf   Page 18 should be what you want for the Dash Cluster wiring. Though, you don't need the dash plugged in to get the motor running. What you want is power as how GTSBoy said. You need to power the ECU. Find in the above link the ECU pin outs (Verify them before just connecting them up from things written on the internet). Find anything needing power, give it power, find anything needing ground, give it ground. Then give the starter motor power through a big cable, and bridge the solenoid on the starter straight to power too.  ECU will be on, and when you give the starter power, it'll spin the starter motor, and it should start. I also hope you have a proper stand, and not just the engine sitting on some wood. You will want it bolted down properly.
×
×
  • Create New...