Jump to content
SAU Community

Recommended Posts

Hi guys/gals,

PAS Westernsalon is looming near, and SAUWA is planning on making a big impact this year. This will be our 2nd year at the event and after great success and fun last year we're planning on doing it all again.

PAS will be held on the 30th and 31st of October, and this year it will be held in the new Convention Center on the Perth foreshore. This venue will be much improved over Belmont Racecourse, with alot more room and many more vehicles expected to enter.

We're looking for members who wish to enter there cars with the SAUWA display. Your car needs to in show-room condition, with something special to set it off from the crowd, either performance mods, wild bodykit, stereo etc. If you have a vehicle you want to enter then please contact me, either via PM, or email me at [email protected].

There are only limited spaces, and is only for paid SAUWA members or SAUWA sponsors ,so not everyone will be able to enter. The cost will be approximately $100 per vehicle, with SAUWA fundraising helping to fund the rest.

Even if you don't plan on entering a car, and just want to help out then we'll need all the help we can get.

Cheers

Paul

SAUWA President

Link to comment
https://www.sau.com.au/forums/topic/47452-pas-westernsalon/
Share on other sites

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

Think we've pretty much decided on a theme - we were jsut waiting on members feedback on it. I think we should keep the Theme talk etc to the "Members Only" section to keep away from prying eyes.

Link to comment
https://www.sau.com.au/forums/topic/47452-pas-westernsalon/#findComment-960694
Share on other sites

What can we do about models. As Paul knows I am able to source a couple of promo/models.. prob just 2... but if they go in the bikini comp do we still have to pay for full 2 days entry.... surely whats his face normally lets the models/bikini girls in for free or sumfin... plus do we have any spare SAU shirts lying around that they can wear.....

Link to comment
https://www.sau.com.au/forums/topic/47452-pas-westernsalon/#findComment-964158
Share on other sites

Dan .... im looking after the girls n costume side of things :P I'll be in touch with you shortly .... we are looking for four models all up ..... and i know EvlR33 approached paul too about it. So if you just want to forward any of the stuff etc to me on [email protected] that'll be cool.

Link to comment
https://www.sau.com.au/forums/topic/47452-pas-westernsalon/#findComment-964792
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...