Jump to content
SAU Community

Precision 6266,Trust T78-29D,NPC push clutch,BPP fuel rail,32 N1 bootlips,Turbosmart FPR800 fuel reg,R32/R33 GTR blow off valves,GTR front diff centre,1000cc injectors


Recommended Posts

Ross R32 GTR balancer - SOLD

Added for sale:

Brand New R32/33 GTR 31 tooth rear diff half shafts. Last set ever - $900

Used Tomei type B valve springs and retainers RB26 -$400

Added for sale:

6 x Sard / Denso 1000cc injectors - $600

HKS T51S 1.00 A/R Turbo. Comes with T4 to HKS 99.1mm V-band manifold flange adapter - $1500

  • 2 weeks later...

Push bearing carriers 14mm, 18mm and 26mm - SOLD

R33 GTR standard ECU sold pending payment.

Modified R32 / R33 GTR transfer case sold pending payment.

  • 2 weeks later...
  • 3 weeks later...

31 tooth rear gtr half shafts - SOLD

Added for sale:

Used HKS EVC III boost controller complete - $250

Used HKS EVC IV boost controller complete - $290

Used Trust oil cooler 13 row core with AN10 tank fittings - $220

Brand new 40psi electronic 60mm JDM dual analogue / digital 40psi display boost gauge with MAP sensor and mounting cup - $220

If anyone needs a 10 clutch transfer case upgrade ($1200 including parts) or OS giken gearset build ($1400 labour only. Can supply all parts if needed.) can do as well. 2 - 3 month lead time. Shipping to and from obviously extra.

I'm away for work right now but will post up turbo pics on Saturday when I'm back.

Tomei type B valve springs and retainers - SOLD

Nitto RB head drain - SOLD

Nitto 2.8 billet 77.7mm stroker crankshaft sold pending payment.

  • 4 weeks later...

Nitto billet 2.8 crankshaft - SOLD AND GONE !

Oil cooler sold pending payment, read again, PENDING PAYMENT ! Still for sale until that.

I will get turbo and 1000cc Denso / Sard injector pics up soon.

Also have NEW 6 x Bosch full length injector adapters for sale 11mm rail  - $80 posted

60mm boost gauge with remote mount MAP sensor 1.6BAR. Remote mount peak / hold setting controller. Boost gauge without pressure in cabin ! Comes with 60mm gauge cup too ! - $110

New photos !

NEW R34 GTR lower shifter bushes - $10

100mm turbo bell mouth. Anodised blue - $80

HKS EVC III boost controller complete with instructions. Max 2 bar boost. - $270

HKS EVC IV boost controller complete with instructions. Max 2.5 bar boost. - $290

6 x 1000cc low impedance 1000cc Denso / Sard injectors. 0.85ms lag. Denso high guide plug type. - $700 FIRM

1.6 bar electronic boost gauge with 60mm mount cup and peak / hold controller. No boost lines into cabin. - $110

NEW 6 x Golebys 11mm Bosch injector adaptors with o rings. Full length.  - $70

HKS T51S 1.00 A/R turbo pics tomorrow. - $1500 ono

WP_20190316_14_17_40_Pro.jpg

WP_20190621_14_44_17_Pro.jpg

WP_20190621_14_44_29_Pro.jpg

WP_20190621_14_44_54_Pro.jpg

WP_20190706_23_09_31_Pro - Copy.jpg

WP_20190706_23_09_31_Pro.jpg

WP_20190706_23_09_47_Pro.jpg

WP_20190706_23_10_14_Pro.jpg

WP_20190706_23_10_54_Pro.jpg

WP_20190706_23_11_08_Pro.jpg

WP_20190706_23_11_41_Pro.jpg

WP_20190706_23_12_00_Pro.jpg

WP_20190706_23_12_19_Pro.jpg

WP_20190706_23_13_08_Pro.jpg

WP_20190706_23_13_23_Pro.jpg

  • 4 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...