Jump to content
SAU Community

Precision 6266,Trust T78-29D,NPC push clutch,BPP fuel rail,32 N1 bootlips,Turbosmart FPR800 fuel reg,R32/R33 GTR blow off valves,GTR front diff centre,1000cc injectors


Recommended Posts

Ross R32 GTR balancer - SOLD

Added for sale:

Brand New R32/33 GTR 31 tooth rear diff half shafts. Last set ever - $900

Used Tomei type B valve springs and retainers RB26 -$400

Added for sale:

6 x Sard / Denso 1000cc injectors - $600

HKS T51S 1.00 A/R Turbo. Comes with T4 to HKS 99.1mm V-band manifold flange adapter - $1500

  • 2 weeks later...

Push bearing carriers 14mm, 18mm and 26mm - SOLD

R33 GTR standard ECU sold pending payment.

Modified R32 / R33 GTR transfer case sold pending payment.

  • 2 weeks later...
  • 3 weeks later...

31 tooth rear gtr half shafts - SOLD

Added for sale:

Used HKS EVC III boost controller complete - $250

Used HKS EVC IV boost controller complete - $290

Used Trust oil cooler 13 row core with AN10 tank fittings - $220

Brand new 40psi electronic 60mm JDM dual analogue / digital 40psi display boost gauge with MAP sensor and mounting cup - $220

If anyone needs a 10 clutch transfer case upgrade ($1200 including parts) or OS giken gearset build ($1400 labour only. Can supply all parts if needed.) can do as well. 2 - 3 month lead time. Shipping to and from obviously extra.

I'm away for work right now but will post up turbo pics on Saturday when I'm back.

Tomei type B valve springs and retainers - SOLD

Nitto RB head drain - SOLD

Nitto 2.8 billet 77.7mm stroker crankshaft sold pending payment.

  • 4 weeks later...

Nitto billet 2.8 crankshaft - SOLD AND GONE !

Oil cooler sold pending payment, read again, PENDING PAYMENT ! Still for sale until that.

I will get turbo and 1000cc Denso / Sard injector pics up soon.

Also have NEW 6 x Bosch full length injector adapters for sale 11mm rail  - $80 posted

60mm boost gauge with remote mount MAP sensor 1.6BAR. Remote mount peak / hold setting controller. Boost gauge without pressure in cabin ! Comes with 60mm gauge cup too ! - $110

New photos !

NEW R34 GTR lower shifter bushes - $10

100mm turbo bell mouth. Anodised blue - $80

HKS EVC III boost controller complete with instructions. Max 2 bar boost. - $270

HKS EVC IV boost controller complete with instructions. Max 2.5 bar boost. - $290

6 x 1000cc low impedance 1000cc Denso / Sard injectors. 0.85ms lag. Denso high guide plug type. - $700 FIRM

1.6 bar electronic boost gauge with 60mm mount cup and peak / hold controller. No boost lines into cabin. - $110

NEW 6 x Golebys 11mm Bosch injector adaptors with o rings. Full length.  - $70

HKS T51S 1.00 A/R turbo pics tomorrow. - $1500 ono

WP_20190316_14_17_40_Pro.jpg

WP_20190621_14_44_17_Pro.jpg

WP_20190621_14_44_29_Pro.jpg

WP_20190621_14_44_54_Pro.jpg

WP_20190706_23_09_31_Pro - Copy.jpg

WP_20190706_23_09_31_Pro.jpg

WP_20190706_23_09_47_Pro.jpg

WP_20190706_23_10_14_Pro.jpg

WP_20190706_23_10_54_Pro.jpg

WP_20190706_23_11_08_Pro.jpg

WP_20190706_23_11_41_Pro.jpg

WP_20190706_23_12_00_Pro.jpg

WP_20190706_23_12_19_Pro.jpg

WP_20190706_23_13_08_Pro.jpg

WP_20190706_23_13_23_Pro.jpg

  • 4 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I'm only really familiar with the R33 setup, the factory filter is very much an encourage fuel pick up thingo.  The factory pump sits about half way down into the tank and the sock runs down into the bottom of the tank.  Mounting an aftermarket pump in the factory location with the typical tiny Walbro filter, I had huge fuel surge issues once the fuel level dropped below 50%. 
    • Hi Gent, Got my r34 GTT 1999 ,wondering if anyone has a stock airbox with snorkel? currenly it has a pod filter which im planning to remove and install the stock part, as this needs to go to vic road for inspection. Appreciate your assistance. 
    • Yeah, I still dunno. The size of the sock should only matter if it is blocked. It is, after all, a filter rather than a "thing to encourage fuel pickup". He has modded the original so that it is now down on the floor, so it's not physically the same as in the original complaint, yet does the same thing. I therefore lean to the problem being somewhere else. Sticking some dynomat on there is a worthwhile experiment, but I'd put $10 on it not fixing the problem.
    • I don't remember hearing it before the coolant and bonnet escapade. I wonder if a couple of pulleys being filled with hot coolant was not to their liking?
    • Took her down to be the wedding car ❤️ and I love the people’s advice 😂    
×
×
  • Create New...