Jump to content
SAU Community

Recommended Posts

I have an R33 GTR seat set, 2 x front and rear bench.  I think they are out of a '96, they have the mauve/purple inserts in the headrest.

The top part of the rear seat was sun affected [ie faded and UV weakened/rotted] so I took it to a local upholstery business and it has languished there for a few months now.  They can't seem to find the grey brushed velour [not the centre inserts, we will be able to re use them] that is endemic to nearly every model.  So I am looking for a supplier that can sell me 3 metres of this material so I can get the seat finished.  Ideally I would go to some other business that can do the job but this would mean a long trip cos I live in a small town in the country, Sydney is 4 hrs away, Canberra is 2.  Plus I feel that if I can find the right material then the upholsterer should be able to do the job [surely its not that difficult].

So does anyone know of code numbers I can ask about [okish], or a supplier [better]?

TIA

Link to comment
https://www.sau.com.au/forums/topic/474930-recovering-rear-gtr-seat/
Share on other sites

Hey mate, I too had similiar damage to my rear seats. It will cost too much to get them fixed and chasing a perfect colour match will be difficult. I would suggest you looking on eBay, Gumtree and the Sales section of this forum to buy used seats and just replace them that way. 

Cheers,

lol....the fabric is available, I've had a section redone before [albeit around 10 years ago].  And the seats are going in my Gtst.  Buying used will turn up the same issue, all the rear seats fade across the top.  The rear window glass just lets that sun in big time!!!

I also have a set of genuine factory leather seats out of a SIII '98 R33 GTR that I've had refurbished [still have to remove and recoat/powdercoat the carriage to finish].  But was hoping to get the grey velour ones sorted as well.  leather is OK in the winter but burns like f#*k in the summer ?

 

I cheated and bought ridiculously expensive Nismo covers as the stitching kept bursting and material fading.

In some ways, I would love to keep the stanard R32 look but *every* time I get out of the car, the jeans on my fat arse rip the bolster

  • Haha 1
13 hours ago, Robzilla32 said:

I cheated and bought ridiculously expensive Nismo covers as the stitching kept bursting and material fading.

In some ways, I would love to keep the stanard R32 look but *every* time I get out of the car, the jeans on my fat arse rip the bolster

Can you post some photos of these "ridiculous expensive Nismo covers"? 

6 hours ago, Robzilla32 said:

Sample pic

 

img87900-rnr20-1.gif

 

They actually look quite very nice. Where did you get them from?

Nengun Performance has them for a crazy $1,700 plus postage. Wow.

https://www.nengun.com/nismo/seat-cover-set-skyline-gtr

 

Edited by Robocop2310

Those covers look very schmick Rob, but - to me - its like hiding rust with new paint.   And I can't afford $1700.  The material I want will cost much less than that, but just have to find the right knowledgeable person to help me source a supply.

  • 2 weeks later...
2 hours ago, tridentt150v said:

Still trying, still asking?

Give these guys a call. A mate of mine had a friend that had his seats repaired by these guys and he seemed happy. I have never used them personally but have  chat with them and let us know how you go.

https://www.gumtree.com.au/s-ad/revesby/other-automotive/car-seat-upholstery-repair-sydney-leather-car-seat-repair/1101453969

  • 1 month later...

You can get new seat covers made. They will make it to suit the new seat and they stitch it into the existing seat so they won't move. Just got mine done, however I'm in Melbourne.
The ones you posted from the website is a cover. You need to dismantle the seat and insert the cover on each section of the seat.
The one RoboCop sent the link through will custom make the covers and will do the same. Dismantle stitch into the existing seat so it doesn't move.

3 hours ago, CU's GTR said:

You can get new seat covers made. They will make it to suit the new seat and they stitch it into the existing seat so they won't move. Just got mine done, however I'm in Melbourne.
The ones you posted from the website is a cover. You need to dismantle the seat and insert the cover on each section of the seat.
The one RoboCop sent the link through will custom make the covers and will do the same. Dismantle stitch into the existing seat so it doesn't move.

Who did you use mate and can you please post some pictures? 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...