Jump to content
SAU Community

Rb26 CAS question/help

BoostisBliss
 Share

Recommended Posts

BoostisBliss Apprentice

BoostisBliss

Posted
Posted

So what would be the cause of a CAS not firing the coil packs or injectors? I've been throwing parts at the ignition system rather foolishly staring with ignitor, harness, now a second CAS. The car cranks but won't start after I installed new turbos. I made all new grounds from 12 gauge wire because everything on that side was pretty ugly. The fuel pump is priming the ECU relay is kicking on the ignition relay next to the ecu is clicking on and as far as I can tell with a test prob all the pins in the ECU are lit as they should be. This has been several months now and I've really searched every platform and I can't find any solid answers to this problem. I would be honored if one of you rb gods could enlighten me as to what could be the issue. With the ignition on and the CAS out when I spin it there's no response from the coils. Please help next stop is an automotive electrician.

Link to comment
Share on other sites
BoostisBliss Apprentice

BoostisBliss

Posted
  • Author
Posted
Ia your CAS wired in backwards? Between different series of looms the pins are all reversed.
E.g. R33 GTR is 1 2 3 4 and R34 GTR is 4 3 2 1.
 
Well the original CAS that was stock was the Mitsubishi unit the silver one and it wasn't working I got another silver Mitsubishi one from a friend and tried it and same no response he also told me it was fine when he pulled it but I am unsure if it was from an r32 gtr. All I know is that it came off of an RB26. I thought the silver Mitsubishi ones were all from early r32s? I also have completely stock wiring and I think I may have been the first person to ever completely remove the CAS. I'll try and revese the pins tomoro on the new one thanks for the advice !!!!1541120708198
Link to comment
Share on other sites
BoostisBliss Apprentice

BoostisBliss

Posted
  • Author
Posted
Fuel injector fuse? Have you checked the coils have power on them? 
The fuel pump is definatly kicking on because I totally rewired it with a new pump, relay and external fuse even got the gauge to read correctly. Here's the thing about the coils when I put on a test probe in the harness it gets a signal from the ignitor but does not fire the coils which I eventually relized was the CAS job to tell them when to fire but like I said I've put 2 different CAS both Mitsubishi units and while spinning it with the ignition on the CAS is not firing the coils or injectors for that matter. And also the car won't start with starter fluid and when you pull a coil and spark plug out after cranking there is no fuel smell from the bore. Another reason I think it has something to do with the CAS. I'm tempted to pull the whole harness from the CAS and trace it back to the ECU but still am trying to find a simpler solution. Thanks for the feedback guys really miss my skyline and riding season is over so I'll be even more depressed without my boost fix. Any info goes deeply appreciated.
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Rear suspension upgrades

      By GTSBoy · Posted

      don't do. Fricken typos. Make me look like the sheeple.
    • Dose Pipe Sutututu
      Rear suspension upgrades

      By Dose Pipe Sutututu · Posted

      Whiteline are wrong.
    • MBS206
      Don't leave a wrapped skyline out in the sun

      By MBS206 · Posted

      I could show you guys photos of wrap having been removed properly, and where the wrap was removed, paint underneath is perfect. Sections of the vehicle didn't have wrap on it, and in those areas, the paint work is destroyed because of how long it had been sitting in the hot QLD sun for many many many years. Wrap even still looked decent. Good quality wrap, and removing it properly shouldn't rip off the paint work, unless the paintwork was already shot to pieces before hand.
    • jacobzking
      R33 Window motor replacement (not switch or amp)

      By jacobzking · Posted

      Any write ups on replacing the window motor?  I've never messed with them (or window regulators) before.   Ever since I've had the car, the driver window would roll down just fine, but most often I'd have the try a few times to get it to go up.  As soon as it started to go up, it always goes up smoothly and quietly.  Seemed like a bad switch.  But now, its stuck in the fully down position and won't come back up.  I get =12/-12V coming out of the relay/amp when pressing the switch up/down.  So the switch and amp are working.  Just a bad motor.  I've also applied 12V directly to the motor and nada.   Any help on replacing the motor?  Can the glass and regulator stay in, and only replace the motor?  Or not possible?  Thanks!!!
    • GTSBoy
      Rear suspension upgrades

      By GTSBoy · Posted

      You are wrong. That's just Whiteline going along with the incorrect slanguage of the sheeple userbase. They are only correctly known as anti-roll bars. They are only incorrectly known as swaybars. They do do anything to prevent "sway". The swaybars that are fitted to trailler hitches do prevent sway. In the trailer. And they do not look like anti-roll bars. So, take your incorrect infopinion away.
×
×
  • Create New...