Jump to content
SAU Community

Recommended Posts

Hi

For Sale: Nissan Skyline R32 GTS-T M Spec

Registration: Unregistered

Location: South West Sydney

Kilometres: 170, 848

Colour: Gun metal grey

Details:

  • Genuine R32 GTR front end
  • Rota grids wheels
  • Coilovers 
  • Front mount intercooler
  • Boost controller 
  • Pod filter
  • Cat back exhaust
  • Blow off valve - Greddy type RS (quite)
  • New Dayco timing belt
  • New front pulley belts
  • New bearings, crankshaft and camshaft seals
  • New rocket cover gasket
  • New water pump
  • New HD excedy clutch, seals and spigot
  • New diff, gearbox and engine oils
  • New inner and outer tie rods
  • New inner and outer tie rods, front and rear boots
  • New rear brakes (Bendix)
  • New spark plugs (copper)
  • Radiator flushed and new fluid
  • Saas boost gauge 
  • 6" speakers, amp, new sub

Interior:

  • No bubbles on dash
  • Clean and Original interior
  • Blue dash lights

Body:

  • Paint faded on drivers side rear quarter
  • Few chips and other minor imperfections 

Other inclusions:

  • Original 4 x R32 GTS-T wheels and tyres
  • R32 GTR injectors (Not fitted)
  • R32 GTR  centre triple guages (Not fitted)
  • Blast Pipes (Not fitted)
  • Turbo Timer (Not fitted)
  • 6L Penrite fully synthetic HPR10 10W-50 plus oil filter

Other Details:

  • 1 x genuine key plus 2 copies
  • I have owned this vehicle for 5 years
  • Tow away and will require blue slip for registration. Will pass (Passed when I bought it to transfer to NSW rego).
  • Have all receipts from work completed by me including some receipts from previous owners, some dating back 2003.
  • Recent issue while registered - Does occasionally turn off while driving but while start up again and run. I suspect this is due to fuel filter will need replacing.
  • Garaged and unregistered for the past 3 years.
  • Reason for sale is no longer having the time to work on the car and enjoy driving it.

Price: 12,500

Contact: Please inbox me for any questions and further details. 

NOT INTERESTED IN SWAPS, STUPID OFFERS OR TIME WASTERS!

Thank you. 

IMG_1210.jpg

IMG_0018.jpg

file3.jpeg

file1-1.jpeg

file1-1.jpeg

file2.jpeg

Link to comment
https://www.sau.com.au/forums/topic/475838-for-sale-1992-skyline-r32-gts-t/
Share on other sites

Clutch replaced at 170,435 km. (less than 500 km). Receipt to prove.

Other work such as water pump, timing belt, tie rods, brakes, spark plugs all less than 2,000 km old.

Additional interior photos attached. 

file-4.jpeg

file1-5.jpeg

  • 3 weeks later...
  • 3 weeks later...
  • 3 weeks later...

How does the car turn off whilst driving and how often? Will it cut out when coming to a stop or while the car is moving?

If you suspect it's a cheap and easy fix changing the fuel filter why don't you change it over yourself?

  • Like 1
23 hours ago, highwaycruiser said:

Jerking reaction occurs  randomly while driving.

no doubt! ?

Note - i read this as 'action' not reaction.  No i have read it properly it's less funny

Edited by barraspalding
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...