Jump to content
SAU Community

Recommended Posts

I have some things that I'm curious about, so I thought I'd ask the people in the know.

We see all these pictures of "every day life in Japan"... and although a picture may say a thousand words, it doesn't always convey the entire story.

Question 1/

Is it true that it's considered to be rude/offensive to sign your name in Japan?

...you need some sort of stamp with your name on it so that you don't offend people by using your signature?

and if this is true, wouldn't it be really easy to forge papers/documents that have been stamped rather than signed by hand?

Question 2/

Unemployment... do business men really pretend to go off to work each day when they have lost their job? Is it some kind of dishonour to their family for them to lose their job? I've also been told that there is a very high suicide rate among the unemployed.

Those are my only questions

........for now. :rofl:

Link to comment
https://www.sau.com.au/forums/topic/47647-truths-about-japanese-culture/
Share on other sites

question 1:

I dont think it is rude to sign your name here in japan. Everytime you get an important piece of mail you have to sign for it... etc etc ive signed my name so many times so i wouldnt say it is offensive

question 2:

Yes it is true that some men do pretend to go to work if they are unemployed but not all the men. and yes i have been told that suicide is high/ more common amongst unemplyed people than employed... after all a japanese mans job is basically the most important thing..

1) I've never heard anything about it being rude to sign your name... I mean, we're talking about foreigners right? Just about all Japanese take it for granted that foreigners don't have a "hanko" (name stamp) and so straight away ask us to sign. I've had some very suprised looks from bank staff etc when I produced my custom "Justin" hanko. As for my wife, she never signs her name unless it's for registered mail (as Andrew said) or for credit card transactions. So as for it being rude to sign your name... I don't think so.

2) Mmmm, a bit of a grey area here with the unemployment statistics. I guess amongst older people the unemployment situation was a bit taboo, and talk about why Mr Watanabe comitted suicide centers around "personal crisis" and never solely blamed on unemployment. On the JR Kobe train line just last week there were two (2!) suicides where people jumped infront of trains... yes, this is common in Japan. Unemployment related? I don't know, but bear in mind, the pressures of living in a society were status is EVERYTHING, life can get a bit shitty if you're at the bottom. But with the younger generation, unemployment - amongst my students at least - has almost become "cool", like they are rebelling against societies expectations or something.

I haven't answered your question well SKY, so I'll shut up now...

On the JR Kobe train line just last week there were two (2!) suicides where people jumped infront of trains... yes, this is common in Japan.

justin its common here on the JR also. Last week I was on a train and it came to a screaming halt for the same reason.

I was on a Yamanote line train a couple of weeks ago and noticed on the monitor a "cease of operations" on a certain line due to an "accident". That must be what they call it...

Akeenan, is RE Amemiya easy to get to in Chiba? I was there a couple of weeks ago to visit Top Secret and used the monorail from Chiba station, then a taxi, so it was pretty easy. I had planned to go to RE Amemiya but due to shady directions, I didn't bother. Should I be kicking myself? :(

Akeenan, is RE Amemiya easy to get to in Chiba? I was there a couple of weeks ago to visit Top Secret and used the monorail from Chiba station, then a taxi, so it was pretty easy. I had planned to go to RE Amemiya but due to shady directions, I didn't bother. Should I be kicking myself?

To be honest with you I havent been there as of yet. So i wouldnt be able to tell you how difficult it is to get to.

Thanks for that....

Now I have a question for DaiOni. :)

..that irezumi in your avatar, is that yours?

I want a perspective of pain from someone who has had a tattoo done with both a gun and with bamboo needle.

I'm not a sadist, but I want to know what it feels like, and how long it takes compared to gun tattoos... also is the healing process longer?

If "ress" means "Rezz", then 4 years... :)

Wow 4 years is quite a long time considering you are there permanently i assuming or is it temporary. Also when you first went there if you can remember, was it a culture shock and did you feel homesick. Ive been studying jp for 2 yrs in uni now and was considering travelling to jp but wanted your experienced opinion.

cheers

Wow 4 years is quite a long time considering you are there permanently i assuming or is it temporary. Also when you first went there if you can remember, was it a culture shock and did you feel homesick. Ive been studying jp for 2 yrs in uni now and was considering travelling to jp but wanted your experienced opinion.

cheers

4 years doesn't feel so long when your married! Being married to a Japanese woman in Japan gives the foreign husband/wife a whole different perspective on Japan... I think most of the Japan residents that frequent SAU are either married to a Japanese or in a long-term relationship.

When I first got here, yes, culture shock. I remember the feeling well even though now Japan is well and truly a second home. Just the feeling of walking down the street and having to think first before you do ANYTHING (not knowing the language well, monetary system, directions, the lot), and not really knowing what was going to happen next was 100% fun for me back then. Not to mention walking down the street going nowhere in particular at midday holding a Sapporo Beer 2L gass mini-keg getting largered was priceless...

When I first got here, yes, culture shock. I remember the feeling well even though now Japan is well and truly a second home. Just the feeling of walking down the street and having to think first before you do ANYTHING (not knowing the language well, monetary system, directions, the lot), and not really knowing what was going to happen next was 100% fun for me back then. Not to mention walking down the street going nowhere in particular at midday holding a Sapporo Beer 2L gass mini-keg getting largered was priceless...

Japanese cars...

Japanese women...

Beer vending machines...

Drinking in the street...

Love hotels...

Japan truly is the promised land.

Can I have my thread back now! :)

Nope, not yet...

... hmmm...

... almost there...

... okay, all your again. :D

I'm at work, I need to generate my own entertainment.

Edit: Actually, I'll help it get back on track... the whole height thing. I've heard that they're not all dwarfs as the urban legends may tell us... but then Streeter who's 6' tall said that he's larger than most... very confusing.

Sciby: the increased wealth and living standards post WWII have meant that the Japanese diet has increased in total calorie count and the percentage of proteins (particularly from meats). What does all that mean? Taller people, basically.

LW.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
×
×
  • Create New...