Jump to content
SAU Community

Recommended Posts

 

Upgrading some bits and pieces so these have to go

Brand new Tomei 1.5mm oil restrictor $20

Tomei type b springs

173002 $450

Rb26 Conrods + forged arias pistons

362388 $500

Rb26 crank long snout mod

$500

Custom rb26 turbo manifold

T3 50mm wastegate pipe

$500

Proboost Gtx3582 .96 rear

$500 $800 for both

Will post some pics as soon as I get the chance

 

Link to comment
https://www.sau.com.au/forums/topic/478451-r32-gtr-used-parts/
Share on other sites

Restrictor $10 not $20 sorry
And rear housing is 1.06 not .96
Rods have Arp bolts
Brand new Tomei head gasket
1321870153 $300
Brand new Arp 202-5403 main studs $300
Brand new Tomei valve guide
163045 $500
Brand new Hks valve stem seals
22999-AN004 $150
Used rb26 arp head studs
$250
Brand new Prp cas bracket $200
Used Standard cas bracket $20
Prp 1.1mm restrictor $10
12219511_1697423373822756_5737861034673035491_n.jpeg12112051_1697423383822755_8016883530952712533_n.jpeg20190828_182831.jpeg20190828_182812.jpeg20190828_182739.jpeg20190828_171932.jpeg20190828_171929.jpeg20190828_171841.jpeg20190828_171656.jpeg20190828_171651.jpeg20190828_171107.jpeg20190828_170850.jpeg20190828_163956.jpeg20190828_163234.jpeg20190828_163231.jpeg20190828_163221.jpeg20190828_163216.jpeg20190828_163209.jpeg20190828_163203.jpeg20190827_183349.jpeg20190827_173201.jpeg

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...