Jump to content
SAU Community

Recommended Posts

I was wondering if anyone here has had to trailer an R34 GT-R before? I'm from the US and as most of you probably know they're generally illegal here until they turn 25 years old but there are a few exceptions under our Show or Display law. I bought one of those eligible cars and currently have it stored in Canada until next year when I can bring it in. Once it's legal I'll need to trailer it since it's 2500 kilometers from where it's at to Arizona where I live. Needless to say there aren't many people I can ask here in the US who've had experience securing an R34 on a car trailer before so I was hoping someone here could give advice. I've trailered my R32 before when it needed to go to a shop for work but I don't know how the R34 compares in terms of attachment points for straps, clearances, and such.

When I trailered my R32 I used an open U-haul trailer with front tire straps and then used Vulcan rim straps crossed in the rear and everything was nice and secure - that was for trips about 320 kms long. For the R34 since it'll be a much longer distance I'll probably be renting an enclosed car trailer for weather protection and security (especially since they're so rare here in the US that it'll probably be an attention magnet on the way down).

Any tips or insight you guys could give as to the best way to secure the car on a trailer would be greatly appreciated. Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/478743-trailering-an-r34/
Share on other sites

Nothing particularly tricky about an r34 compared to anything else, unless it is a vspec with the carbon fibre undertrays in place which would make it much harder to get to chassis tie down points. (eg, around the rear subframe)

These days I always just use wheel tie downs, I have an open trailer and they are very quick and secure. Unfortunately if you are using an enclosed trailer you will be somewhat at the mercy of the available tie down points in the trailer, and depending on width it can be hard to get to the wheels to tie down there

4 hours ago, Duncan said:

Nothing particularly tricky about an r34 compared to anything else, unless it is a vspec with the carbon fibre undertrays in place which would make it much harder to get to chassis tie down points. (eg, around the rear subframe)

These days I always just use wheel tie downs, I have an open trailer and they are very quick and secure. Unfortunately if you are using an enclosed trailer you will be somewhat at the mercy of the available tie down points in the trailer, and depending on width it can be hard to get to the wheels to tie down there

Thanks for the input. I hadn't thought about that with the undertray. Like Mark said, it's a V-spec since only the MP2 V-specs like this one I have or an M-Spec Nur are legal for US import right now (although the latter will remain much more of a hassle until 2023).

The trailer I'm planning on renting will be an 8.5x20 ft model with both D-rings and E-track so hopefully I can just do something like this without too much hassle:

tie-downs-on-corvette-popup.jpg

4 hours ago, GTSBoy said:

Straps up and over the tyres, like a tow truck, is the most secure.

Agree this is the best and quickest way if the trailer is set up for it.

Otherwise, I tie it exactly as per your pic

On 9/20/2019 at 11:46 PM, GeeDog said:

I use 4 of these:

Tyre strap

Along with 4 x 2500kg ratchet straps - one on each wheel. 

Haven't seen those before. Those look really handy. I'll have to see if I can get some over here in the States.

On 9/20/2019 at 9:32 PM, GTSBoy said:

Straps up and over the tyres, like a tow truck, is the most secure.

 

On 9/21/2019 at 1:49 AM, Duncan said:

Agree this is the best and quickest way if the trailer is set up for it.

Otherwise, I tie it exactly as per your pic

Okay, thanks for the additional input! What I'll probably do is get a least a pair of over-the-wheel straps for at least the front to go with a set or two or lasso and/or rim straps for all four corners as added insurance.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...