Jump to content
SAU Community

Electrical issue c33 Laurel rb25det

Adrianrb
 Share

Recommended Posts

Adrianrb Rookie

Adrianrb

Posted
Posted

So I have a c33 laurel swapped stock rb25det built myself and been running for a year with no issues, Couple months ago my car started to just shut off while driving no pattern emerged as to when or why, would just be completely random. Sometimes would go days without doing it sometimes 3/4 times a day. All I would have to do is just turn the key off and back on and she would fire straight back up. 

Then progressively got worse and I’d have to turn they key a couple of times. Then got to the point it wouldn’t fire, I assume electrical but Ive got no idea where to start looking. 

Basically when it happens I loose all dash lights after a split second, ecu still has power, radio still works, windows work, car turns over, fuel pump doesn’t prime.

so far I have tested every relay i could find in the car except fuel pump, pulled ever fuse, gone over all loom given it a shake to try source a possible loose connection or break in wire and found nothing

im thinking it could possible be my alarm but was installed by previous owner and wouldn’t know where to start. Completely stummed and would love to pick your guys brains to get her back up and running for summer 

cheers in advance for any help ??

Link to comment
https://www.sau.com.au/forums/topic/478826-electrical-issue-c33-laurel-rb25det/
Share on other sites
PLYNX Mentor

PLYNX

Posted
Posted

Is it a series 1 motor ? Then its probably the air flow meter. The internal connector pins that are soldered together have come apart and need re-soldering. Run a search here on this forum i think there is a tutorial on it.

Adrianrb Rookie

Adrianrb

Posted
  • Author
Posted
3 minutes ago, PLYNX said:

Is it a series 1 motor ? Then its probably the air flow meter. The internal connector pins that are soldered together have come apart and need re-soldering. Run a search here on this forum i think there is a tutorial on it.

She’s a series 2, I have been having problems with afm wiring definitely a crappy connection at the plug somewhere but tried having a wriggle around and doesn’t fix anything usually just goes into limp doesn’t shut car off when she plays up 

Adrianrb Rookie

Adrianrb

Posted
  • Author
Posted (edited)

Update... 

so ecu doesn’t have power when car dies but when power to ecu is unplugged in the engine bay the dash lights return 

I’m assuming fault with ecu have opened up and cannot see any visible issues, possibly short somewhere but stumped because will run for a few minutes then switch off and not run for a hour or two

with car running and I unplug afm car dies but will start and run in limp, return to normal once plugged in. I don’t see it being an issue with afm  

Edited by Adrianrb

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • uchoa
      Howdy from the states.

      By uchoa · Posted

      To be determined, Luke, to be determined. 😁 Definitely the car
    • Duncan
      S1 headlights?

      By Duncan · Posted

      It might be worth having a good look at the chassis behind the bumper then; most people prefer the series 2 look so it might have been changed to cheaper parts as part of an earlier repair
    • Celticsfan03
      S1 headlights?

      By Celticsfan03 · Posted

      The car itself a series 2. I was just curious about the headlights and just wanted to confirm that they were series 1. Good to know the rest of the front end is series 1. It’ll be easier for me to find parts on the aftermarket side of things lol
    • WMDC35
      R34 engine swap Rb25de neo to s1 Rb25det

      By WMDC35 · Posted

      If you've wired up the coils & injectors properly, & have the neo CAS loom for the trigger, it should all work. The VCT works the same way so just different plugs between s1 & neo. Assuming DBW if no IAC. Don't bother with the stock boost solenoid with g4x.
    • GTSBoy
      R34 engine swap Rb25de neo to s1 Rb25det

      By GTSBoy · Posted

      THERE IS NO IAT SENSOR ON ANY SINGLE TURBO RB. And the one on an RB26 is not for "engine control" - it's really too big and too slow and is only used for over-temp alarming (as far as I can tell). Anyway, you don't have one. You want/need one for the Link, then you need to buy one, find a spot for it, and wire it in. You do know that the stock boost solenoid is not capable of "control", right? It is merely on or off, for the low boost (5 psi) and high boost (7psi), which the ECU enforces mostly based on gear. The stock solenoid is not for PWM control and is not plumbed up in a way to provide it. If you want to control boost properly, then you need a proper MAC valve. And yes, you can wire either of them direct to the ECU. Well, I assume you can - I don't know what the boost solenoid pins on the plug and play Link are capable of. They really should be as capable as any normal Link - but seeing as it is plg and play, it might be limited to stock functionality. Read the doco.   You really do just want to plug stuff together without understanding how it works, right? I can't help you there. I don't know the plug types or pinning on half the stuff you're asking about. If I had to do it I would sit down with the wiring diagrams, the car/looms and a multimeter and work out what is what.
×
×
  • Create New...