Jump to content
SAU Community

Recommended Posts

Hi all, after reading various threads and watching various YT videos I've narrowed down my exhaust choices to either the HKS Super Turbo or Tomei Expreme TI for my R32 GTR. I like the sound of both and both can support my power goals down the road. I have a slight leaning towards the HKS as I appreciate it being quieter and smoother sounding. The Tomei has a slightly larger diameter at 90mm vs 85mm, weighs about 10kg less, looks a bit prettier, costs a bit less, and is titanium. 

HKS lists their decibel levels and ground clearance on their spec sheet, but Tomei does not (Though they have a decibel reading for their more expensive Sports Titanium exhaust).

My question is, does anybody have/know of any other Tomei decibel readings and possibly the ground clearance once installed? Any opinions on sound or knowledge from experience is welcome too.

I've read a thread where someone with a Tomei said they were idling at 90db and passing 103db+ at 3k rpm even with a silenced decat pipe. That seems terribly loud and could get tedious quite quickly. It sounds great in videos, but if those decibel readings are right then I'm not sure if I'd enjoy it for long. The db are more about the comfort for me than getting onto a track, as I don't intend on doing any track days any time soon. Another thread had an owner switching from a titanium exhaust to the Super Turbo and being quite pleased. 

I have a fairly stock car engine wise, but HKS intakes and a Bee-R equal length downpipe as far as parts that affect sound. It's not lowered significantly, maybe an inch or so from factory on Hipermax IV coilovers  with out of the box recommended settings. 

INB4 some folks swear by custom exhausts but in my area there aren't really any shops that do that sort of thing and the few with exhaust experience cost some BIG dollars.

Tomei is extremely loud. If you plan on driving any substantial highway driving you will probably regret it.

I would get rid of the HKS intakes for a stock airbox ASAP, this is the stuff those green mushrooms let in: http://mkiv.com/techarticles/filters_test/2/index.htmlbkbk

I have a super turbo on an R34, with an extra resonator in the front pipe. very quiet, no drone but gets a bit of a bark when you're up it. highly recommended.

the exhaust is 85mm but necks down to a 3" flange at the Cat converter end. I had it chopped off with a 3.5" flange welded on after expanding the pipe to fit it.

 

as stated, Tomei is MUCH louder.

Edited by burn4005
14 hours ago, joshuaho96 said:

Tomei is extremely loud. If you plan on driving any substantial highway driving you will probably regret it.

I would get rid of the HKS intakes for a stock airbox ASAP, this is the stuff those green mushrooms let in: http://mkiv.com/techarticles/filters_test/2/index.htmlbkbk

Yeah I've actually got an apexi kit I've been meaning to put on since I saw that link a while back (I've seen some threads question the validity of the test but I tend to err on the side of caution). I got fresh HKS filters soon after I got the car, maybe ~800km ago, more as a placeholder for once I got the apexis on. 

Thanks for the input. Most of my driving is either parkways for pleasure driving or long highway miles. 90's vehicles don't exactly have the best sound deadening so the drone from the tomei would probably get real old real fast on an 8 hour trip to visit family. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...