Jump to content
SAU Community

Recommended Posts

Hi all, after reading various threads and watching various YT videos I've narrowed down my exhaust choices to either the HKS Super Turbo or Tomei Expreme TI for my R32 GTR. I like the sound of both and both can support my power goals down the road. I have a slight leaning towards the HKS as I appreciate it being quieter and smoother sounding. The Tomei has a slightly larger diameter at 90mm vs 85mm, weighs about 10kg less, looks a bit prettier, costs a bit less, and is titanium. 

HKS lists their decibel levels and ground clearance on their spec sheet, but Tomei does not (Though they have a decibel reading for their more expensive Sports Titanium exhaust).

My question is, does anybody have/know of any other Tomei decibel readings and possibly the ground clearance once installed? Any opinions on sound or knowledge from experience is welcome too.

I've read a thread where someone with a Tomei said they were idling at 90db and passing 103db+ at 3k rpm even with a silenced decat pipe. That seems terribly loud and could get tedious quite quickly. It sounds great in videos, but if those decibel readings are right then I'm not sure if I'd enjoy it for long. The db are more about the comfort for me than getting onto a track, as I don't intend on doing any track days any time soon. Another thread had an owner switching from a titanium exhaust to the Super Turbo and being quite pleased. 

I have a fairly stock car engine wise, but HKS intakes and a Bee-R equal length downpipe as far as parts that affect sound. It's not lowered significantly, maybe an inch or so from factory on Hipermax IV coilovers  with out of the box recommended settings. 

INB4 some folks swear by custom exhausts but in my area there aren't really any shops that do that sort of thing and the few with exhaust experience cost some BIG dollars.

Tomei is extremely loud. If you plan on driving any substantial highway driving you will probably regret it.

I would get rid of the HKS intakes for a stock airbox ASAP, this is the stuff those green mushrooms let in: http://mkiv.com/techarticles/filters_test/2/index.htmlbkbk

I have a super turbo on an R34, with an extra resonator in the front pipe. very quiet, no drone but gets a bit of a bark when you're up it. highly recommended.

the exhaust is 85mm but necks down to a 3" flange at the Cat converter end. I had it chopped off with a 3.5" flange welded on after expanding the pipe to fit it.

 

as stated, Tomei is MUCH louder.

Edited by burn4005
14 hours ago, joshuaho96 said:

Tomei is extremely loud. If you plan on driving any substantial highway driving you will probably regret it.

I would get rid of the HKS intakes for a stock airbox ASAP, this is the stuff those green mushrooms let in: http://mkiv.com/techarticles/filters_test/2/index.htmlbkbk

Yeah I've actually got an apexi kit I've been meaning to put on since I saw that link a while back (I've seen some threads question the validity of the test but I tend to err on the side of caution). I got fresh HKS filters soon after I got the car, maybe ~800km ago, more as a placeholder for once I got the apexis on. 

Thanks for the input. Most of my driving is either parkways for pleasure driving or long highway miles. 90's vehicles don't exactly have the best sound deadening so the drone from the tomei would probably get real old real fast on an 8 hour trip to visit family. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...