Jump to content
SAU Community

Recommended Posts

My close associate is in financial hardship and may be seriously considering the sale of his pride and joy.

Beautifully presented R34 GTR, Genuine V-Spec, Nismo blue.

30k, this vehicle stands out from the crowd.

Has some reasonably serious mods, including genuine N1 Turbo's, Top Secret Carbon Fibre Bonnet amd huge rear wing, NISMO LM wheels, HKS fuel rail, rear boot is set up running extensive fuel lines, triple plate clutch, runs a comfortable 1.2 bar, has not tuned it for max output yet, as he is quite conservative, and believes it has more than adequate pwr.

Had 1 run on dyno...310 KW at the wheels - with slight tuning, very capable of 400 plus.

If you are GENUINELY after an exceptionally striaght R 34 GTR, this one is fantastic. IT has NEVER been in an accident, no exceptions to this rule. There is no bog anywhere on this vehicle, and panels line up beautifully.

Pics available on request and will provide more details and pics to those genuinely expressing interest.

Looking at serious offers in excess of $85 K, which is exceptional value for this calibre of vehicle and the dollars invested.

Interested parties, pls send pm, or email interest to me at [email protected].

Vehicle is in Melbourne.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/48147-eoi-r34-gtr-vspec-nismo-blue/
Share on other sites

I agree that with those mods it is worth in excess of 85k. Is there any chance he could put it back to stock for sale at a lower price though? He could probably recover more cash selling the parts seperately.

I think a lot of people looking on the Skyline forums for 2nd hand skylines know alot about pricing and really want to get the best deal, too often skylines are sold on the forums quite cheaply, good for buyer, not the greatest for seller. I hope that the car is sold through the paper and some chump pays more for it.

bump...
  • 2 weeks later...
I think a lot of people looking on the Skyline forums for 2nd hand skylines know alot about pricing and really want to get the best deal, too often skylines are sold on the forums quite cheaply, good for buyer, not the greatest for seller.  I hope that the car is sold through the paper and some chump pays more for it.

Thanks bud...

wasnt this the 34 gtr that pushed 260kw at the autosalon in melbourne earlier this year? I think so. n1s with 400kws ? where ? where? Where can i get a set of those? T78 setup by Race Pace - and im only pushing a tad over 400 at the wheels and thats in shoot out mode. Nice car though, not sure about the claimed power. No offence intended Kitch.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...