Jump to content
SAU Community

Recommended Posts

Anyone have a clue on what it could be?

Just bought the car, didnt tick when i inspected it, started after i got home...

Car has an idle issue, ive changed the spark plugs and rocker cover gaskets so far, soon i'll be changing the two coil packs i tested with the multi that were out of ohm range.

Only thing im thinking is sticky valves/lifters/rockers as the car runs fine regardless of the noise and only ticks at idle or low rpm.

Sounds really bad though, especially when you turn it off, makes a bad clacking sound.

Any help or advice will be much appreciated, thanks.

Link to comment
https://www.sau.com.au/forums/topic/481521-m35-stagea-ticking-sound/
Share on other sites

  • 2 weeks later...

Sounds awful. 

Fan hitting the shroud

Bearing gone on one if the pulleys.

Loose timing or cam chain slapping around (pray its not that)

The sound of a damaged hydraulic lifter would be alot faster.

Good luck

  • 2 weeks later...
  • 2 months later...

Still havent sorted it sorry mate.

The sound hasnt gotten any worse, ive taken it to a jdm mechanic who has rebuilt these engines before and he said that it doesnt sound metallic so wouldnt be a cylinder, in the head etc and sounds like the vct/timing chain. All a money factor and worth factor atm.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...