Jump to content
SAU Community

Recommended Posts

When : 03 July 2021

LocationPhillip Island Grand Prix Circuit

Pricing:
Affiliate Discount – $245.00  Affiliate Code: 8DN69YDB
Come & Try – $230.00

COME AND TRY GROUP - $230 - MAX 20 ENTRIES - INCLUDES MOTORSPORT AUSTRALIA LICENSE FEE

The WRX Club will be running a single come and try group at this event aimed at introducing new members to Motorsport. The come and try component is untimed, and only valid for those that do not currently hold a L2S license or haven't purchased a Level 1 come and try license in the past twelve months.

Motorsport Australia Level 1 Come and Try Licenses are included in the cost of the come and try group entry fee ($205 base fee + $25 license)

Due to the single group nature of this event, two come and try drivers can not share the same vehicle 

Full event details and sign up at the link below.

  • Like 2
  • 5 weeks later...


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...