Jump to content
SAU Community

Recommended Posts

The time has come to depart with my track-day toy and for someone else to enjoy it as much as I have. I've owned it since 2017 and have used it regularly at PI, Sandown and the occasional Winton events.
 
I'm no longer getting to use it as much as I want to - therefore it needs to go & be enjoyed by the next person.
The car is log booked as a sports sedan and all events entered have been documented. The car was originally registered in NSW (I can give you the history of the car to serious buyers).The vin and chassis number are still ok to be used on the street if ever required.
 
Was last tuned by Racepace in Bayswater VIC with a very safe 14 PSI tune on 98 - see dyno sheet in the images. It's capable of producing plenty more power if that's what you are chasing.
 
A long list of what's included:
  • HKS cams 256/264
  • HKS exh cam gear (VCT remains on the inlet)
  • HKS timing belt
  • N1 water pump
  • Low temp thermostat
  • Plazmaman Plenum
  • 550cc injectors
  • Walbro in tank pump
  • Nismo fuel pressure reg
  • GTR intercooler
  • Custom stainless steel intercooler piping
  • Turbosmart BOV
  • 10 row oil cooler with remote filter
  • Z32 airflow meter
  • Apexi Power FC computer
  • Apexi AVCR Boost controller
  • Stainless steel high mount manifold
  • GT3071R turbo with 0.64 rear hsg ( also has a spare 0.86 ceramic coated rear hsg)
  • Tial 38mm wastegate
  • 3” exh with no cat ( comes with a cat to bolt in if required)
  • Custom 10 ltr sump
  • Splitfire coil packs
  • Rear head drain
  • Ross racing balancer with reduction on W/P and P/S (A/C removed)
  • 5 puck brass button clutch
  • Nismo short shift gear stick
  • Nismo gear knob
  • R33 GTR Brakes, RDA rotors, Hawk / Ferodo pads
  • Patrol master cylinder
  • Braided lines
  • In cabin mounted bias adjuster
  • RPM removable steering wheel
  • Stack dash with shift light
  • 1.5 way mech LSD
  • Alloy bushed rear sub frame with alloy spacers for roll centre adjustment and sub frame pitch adjustment
  • Complete interior strip out and paint
  • 6 point weld in cage with cross in main hoop and rear legs (Cams certified)
  • OMP WRC drivers seat
  • Sparco Passenger seat
  • OMP passenger foot rest
  • Drivers harness
  • Selby sway bars front and rear
  • Various Whiteline bushes throughout the car
  • Completely stripped out wiring and interior and race prepped
  • BC Gold coilovers
  • GKtech front & rear camber arms, caster arms & rear toe arms
  • FIA spec. padding on cage around drivers position

The wheels are Advan’s 17 x 8 front and 17 x 9 rear and they currently have AR1's (50%) on them.

During my time owning the car I've always kept it in top running condition, with frequent maintenance & always did the regular fluid flush's between events. I also have all of the stock suspension parts and various parts/spares, boot lid & OEM spoiler,  dissembled RB25 short block & overhauled head. Front bar is not in great condition, but also have two spares which I haven't had the opportunity to modify to look nice & make fit.

I also have a car trailer (VIC registered) which I use to tow the car around - it has 3mtr ramps and electric brakes with light commercial tyres - all minimal wear. Can sell as a package if interested.

A complete package for getting into some serious fun at track days & not have to worry about destroying your daily!

Not willing to part-out and I'm not in any rush to sell, so low-ballers will not get a response.

The car is based in Moorabbin, VIC.

Looking for offers above $25K (excluding trailer). Contact me via DM here and I'll get in touch with any more info.

 

Dyno Sheet.jpg

on trailer.jpg

Rear DS Qtr.jpg

@wet PI.JPG

Interior.JPG

VIC relay.JPG

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/483208-r33-gts-t-track-car/
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...