Jump to content
SAU Community

Recommended Posts

On 16/04/2022 at 7:03 PM, GTSBoy said:

Hi Matt! I still don't know exactly what Brenton ended up doing to make mine work! Never saw the final wiring diagram, then got distracted.

We just had to get the compressor output in the correct voltage range to make it happy. Can't remember how we did that. Resistors or something. Was a while ago!

  • 1 year later...

Well here we are, a year later and my AC has depleted again. I refilled it back in Feb only for it to lose refrigerant a month later. Luckily, as recommended by others on here, I added dye this time around and, whilst using a UV light, have found traces of semen dye around the compressor connector. I'm going to get a rebuilt compressor whilst I'm in there, seeing as they're cheapish in JP. 

Now, my question is, how difficult is it to remove the AC compressor? any special tools needed? from looking at other cars I've seen you need to disconnect the pipe that runs to the cabin, then a couple around the compressor. probably the intake pipe too - engine is stock. 

Yes, yes I know, cannot vent it to atmosphere. I don't know the regs in Japan but it's probably incomprehendible anyway. The system is most likely empty by now as it's been over a month since the AC pressure switch was triggered. 

35 minutes ago, GoHashiriya said:

Well here we are, a year later and my AC has depleted again. I refilled it back in Feb only for it to lose refrigerant a month later. Luckily, as recommended by others on here, I added dye this time around and, whilst using a UV light, have found traces of semen dye around the compressor connector. I'm going to get a rebuilt compressor whilst I'm in there, seeing as they're cheapish in JP. 

Now, my question is, how difficult is it to remove the AC compressor? any special tools needed? from looking at other cars I've seen you need to disconnect the pipe that runs to the cabin, then a couple around the compressor. probably the intake pipe too - engine is stock. 

Yes, yes I know, cannot vent it to atmosphere. I don't know the regs in Japan but it's probably incomprehendible anyway. The system is most likely empty by now as it's been over a month since the AC pressure switch was triggered. 

Shrug, I would vacuum it anyways just in case but yeah most likely it has all vented out anyways. HA section of the R34 manual details how to remove it, doesn't appear to be anything crazy but it will almost certainly be annoying anyways because Nissan. Expect to remove power steering bits in the way, also the intake piping. I would be surprised if you have to remove the AC lines at all, should be able to disconnect much closer to the compressor and call it good. You may want to flush the system if you've had a leak and replace the receiver/drier as well.

  • Like 1
On 5/12/2023 at 4:16 PM, joshuaho96 said:

Shrug, I would vacuum it anyways just in case but yeah most likely it has all vented out anyways. HA section of the R34 manual details how to remove it, doesn't appear to be anything crazy but it will almost certainly be annoying anyways because Nissan. Expect to remove power steering bits in the way, also the intake piping. I would be surprised if you have to remove the AC lines at all, should be able to disconnect much closer to the compressor and call it good. You may want to flush the system if you've had a leak and replace the receiver/drier as well.

Thanks for the input. Couldn't find anything regarding removing the compressor in the HA section but it seems fairly straightforward.

EDIT: got it. It's in the HA section of the Japanese manual for me, not in the english one. 

Edited by GoHashiriya
typo
13 hours ago, GoHashiriya said:

Does anybody know what oil I can use, and the quantity for the AC system/compressor only?

The FSM says "use DH-PR for the compressor oil" other sources are saying PAG 100.

https://ithurukaramu.lk/2020/02/14/lubricants-for-air-conditioning-and-refrigeration/

Looks like DH-PR is PAG 100. If the compressor is dry reference the underhood sticker or look up a picture of one online to figure out how much oil you need to add.

  • Like 1
1 hour ago, joshuaho96 said:

https://ithurukaramu.lk/2020/02/14/lubricants-for-air-conditioning-and-refrigeration/

Looks like DH-PR is PAG 100. If the compressor is dry reference the underhood sticker or look up a picture of one online to figure out how much oil you need to add.

Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...