Jump to content
SAU Community

Recommended Posts

Hi guys

Has anyone noticed that on the stock R34 GTR rear muffler the right tip is almost not been used? Firstly there is almost no black exhaust deposit, and secondly, after a drive that right one is is only warm, while you can't touch the left one without getting burned.

r34gtrtipsb.thumb.jpg.d85dfcc167a16b3059e1bbbe26ede02c.jpg

Is there maybe a spring loaded flap in the box that only opens up the right section at a certain amount of counter pressure? Or what is the reason for that?

Link to comment
https://www.sau.com.au/forums/topic/484856-r34-gtr-stock-rear-muffler-insights/
Share on other sites

9 hours ago, silencium said:

Hi guys

Has anyone noticed that on the stock R34 GTR rear muffler the right tip is almost not been used? Firstly there is almost no black exhaust deposit, and secondly, after a drive that right one is is only warm, while you can't touch the left one without getting burned.

r34gtrtipsb.thumb.jpg.d85dfcc167a16b3059e1bbbe26ede02c.jpg

Is there maybe a spring loaded flap in the box that only opens up the right section at a certain amount of counter pressure? Or what is the reason for that?

There is a spring-loaded flap that only runs it at high enough flow rates. Nissan did this to reduce noise at low load/RPM while reducing backpressure at higher flow rates. 

23 hours ago, Duncan said:

You may well be the only person in the world still choking an R34 GTR with a standard exhaust!

It's not quite like that  ;) I've put that backbox on my daily S13. Got sick of the drone all aftermarket mufflers give, what is a problem of their design, because all of them are absorption type mufflers, and these just don't work for low frequencies. So that stock resonator type muffler (all oem mufflers are resonators) that is designed to work for a 300hp engine is the perfect solution for my daily. Also MOT is very strict in my country, so as a bonus its says "Nissan Calsonic" on the box  ;D

P_20230804_001617.jpg

  • Like 1
On 8/13/2023 at 2:04 PM, silencium said:

Thanks for your enlightenment. That's what I though and what makes sense  :)  Would you know of a picture or a diagram of that System by any chance?

Not sure there's any great pictures online, if you stick an inspection camera down the muffler you'll probably see it.

57 minutes ago, silencium said:

It's not quite like that  ;) I've put that backbox on my daily S13. Got sick of the drone all aftermarket mufflers give, what is a problem of their design, because all of them are absorption type mufflers, and these just don't work for low frequencies. So that stock resonator type muffler (all oem mufflers are resonators) that is designed to work for a 300hp engine is the perfect solution for my daily. Also MOT is very strict in my country, so as a bonus its says "Nissan Calsonic" on the box  ;D

P_20230804_001617.jpg

In that case, you just quadrupled your car's value :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...