Jump to content
SAU Community

R32 GTR front Differential and prop shaft

Nsn32
 Share

Recommended Posts

Nsn32 Apprentice

Nsn32

Posted
Posted

Hi all, 

My 1990 R32 GT-R has developed a bad knocking sound coming from the what I assume is the front differential (the reason why I assume this is when I pull the fuse for the asetta the knock disappears put it back in and it comes back and yes the transfer case and gearbox has fresh oil in it), the uni joint on the front differential side was broken bad it would have been causing massive vibrations into the pinion gear, 

 

has anyone experienced this before? And is anyone selling a front differential Center complete with pinion and crown gear ? 
 

For the drive shaft I can’t find any driveline workshops in SE QLD that will put a new uni joint on the front prop shaft as they are a staked uni joint no one wants to touch it 😭

does anyone have any recommendations on any workshops that can replace the uni joint ? 
 

sorry if this has been posted before I couldn’t find anything using the search function for this exact issue 

thank you 

NSM32 

 

sorry for the bad photo, yes it’s missing a bolt I took the photo while removing the shaft to take to a workshop to try and get it repaired 

IMG_7610.png

  • 2 weeks later...
GTSBoy Grand Master

GTSBoy

Posted
Posted

Hardy Spicers. Only the single largest and most well known manufacturer and repairer of power transmission shafts in the whole country. They are present in most capital cities, and many regional cities.

They will build you a complete new driveshaft if need be.

There are also automotive focused workshop/manufacturers, like GJ Drivelines in Melbourne. I struggle to believe that there is not someone doing similar work in Brisbane. A quick google shows Universal in Brissy, Driveline Services in 2 locations in Brissy, someone else on the Goldy, Mal Wood in Warwick....

Nsn32 Apprentice

Nsn32

Posted
  • Author
Posted
3 hours ago, GTSBoy said:

Hardy Spicers. Only the single largest and most well known manufacturer and repairer of power transmission shafts in the whole country. They are present in most capital cities, and many regional cities.

They will build you a complete new driveshaft if need be.

There are also automotive focused workshop/manufacturers, like GJ Drivelines in Melbourne. I struggle to believe that there is not someone doing similar work in Brisbane. A quick google shows Universal in Brissy, Driveline Services in 2 locations in Brissy, someone else on the Goldy, Mal Wood in Warwick....

Never heard of them they obviously aren’t in Australia…. 
 

no shop that I’ve been to will touch it as the shafts are spiked…. 

GTSBoy Grand Master

GTSBoy

Posted
Posted
39 minutes ago, Nsn32 said:

Never heard of them they obviously aren’t in Australia

You shitting me? They have a location in Brisbane.

39 minutes ago, Nsn32 said:

no shop that I’ve been to will touch it as the shafts are spiked…. 

Who cares? Cut it off and make a new end. That's why I said Spicers in the first case. When you want to fit an RB25DET gearbox in an R32, for example, you need to cut and shut the front half of the tailshaft using the end from the RB25 geabox that has the matching spline. Guess who does that? Spicers.

You want a brand new tailshaft? Made from steel? Aluminium? Maybe even CF? Then you go to someone like GJ and they will build it from scratch. Putting a brand new universal onto the end of a tailshaft is not difficult. You just need to go to a proper shop that can weld and balance such things. Not Majid's mechanical and kebab shop on the corner.

The other places I listed in Brisbane sound like it should be in their capability list also.

  • Like 1
Nsn32 Apprentice

Nsn32

Posted
  • Author
Posted
29 minutes ago, GTSBoy said:

You shitting me? They have a location in Brisbane.

Who cares? Cut it off and make a new end. That's why I said Spicers in the first case. When you want to fit an RB25DET gearbox in an R32, for example, you need to cut and shut the front half of the tailshaft using the end from the RB25 geabox that has the matching spline. Guess who does that? Spicers.

You want a brand new tailshaft? Made from steel? Aluminium? Maybe even CF? Then you go to someone like GJ and they will build it from scratch. Putting a brand new universal onto the end of a tailshaft is not difficult. You just need to go to a proper shop that can weld and balance such things. Not Majid's mechanical and kebab shop on the corner.

The other places I listed in Brisbane sound like it should be in their capability list also.

Your arrogance is astounding 

 

firstly it’s not a “tailshaft” it’s a prop shaft from the transfer case to the front diff 

 

secondly every drive shaft shop I called including the ones you mentioned above refused to touch it.. 

 

pull your head out of the sand if you have no helpful information don’t bother commenting 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • QB6SAGR
      Battle of the broken skylines

      By QB6SAGR · Posted

      Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Rezz
      Spotted on the street....

      By Rezz · Posted

      Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Murray_Calavera
      What should I do next to hold the head on

      By Murray_Calavera · Posted

      Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...