Jump to content
SAU Community

Recommended Posts

well it started this morning but didnt have access to the computer at work to post

epping was full of cops this morning. from what i could see from work, there were a lot on cooper st. one car even directly across the road from us.

there were a lot on high st raping a 180 in front of bunnings, further down cooper st in front of st monica's and the station were 2 undercover cops on foot in street clothes with tiny cb's on their shirts.

so what i counted (from what i could see when i was in the office)

1 - vt station wagon w/ aftermarket wheels.

1 - red vl

1 - 4wd with a MASSIVE caravan trailer (less caravan) that was longer than the whole car

7 - various sized trucks with different loads etc

1 - little old lady that the cops removed her number plates because she had a reflective piece of glass on top. it was reflecting everything when they were handling it, bloody theif of an old lady, thank god our lives are safe now that that dirty rotten scoundral is off our streets. thankyou victoria, i love you all.

high st has apparently had its fair share also (coming from reports of customers)

one of our employers started barking at them, but he is massive with full tattoos on his legs so no one will be slapping his wrist any time soon.

i must say though, it was GOOD to see them actually pulling over people that may have been unroadworthy and not just because they looked fast and were an import

Link to comment
https://www.sau.com.au/forums/topic/48618-blitz-in-epping/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
×
×
  • Create New...