Jump to content
SAU Community

Recommended Posts

Howdy,

Due to problems coming up with my new motor installed, i cant put these rims i bought to go on my car anytime soon. Instead of waiting for a few months, I though someone else may have good use out of them.

They are 18" rims.

The rears are 18" x 9.5" wide (120 114.3 PCD) with +38 offset

The fronts are 18" X 8.5" wide (112 114.3 PCD) with +35 offset

These rims will fit a r33 gtst or on a r32 gtst (what i was going to put em on - yes they will fit if you run 235's on the front and 245's or maybe 255's on rears) (check to see if they will on a r33)

I have been to a tyre joint, and you can fit anywhere from 235 - 265 on the rear 9.5" wide rims legally....

Come in Shadow chrome. The fronts are BRAND new rims, and the rears are as new - no scratches on dish area. I measured the dish on the rear rims, and from the studs to the outer lip its 70mm!!!!!

Price - $1200(includes shipping anywhere in Aus)

or $1000 if buyer pays postage

see pics below.

If you can get these somewhere else cheaper or in a better/worse condtion etc....- I dont want to hear about it. Keep your comments to yourself.

Thanks. :P

Link to comment
https://www.sau.com.au/forums/topic/49533-18-deep-dish-rims-shadow-chrome/
Share on other sites

rx-[7] wtf do you think your doing????

dont put a link to your thread in his thread!!! FFS!!!!!!!!

mods please delete his post them mine. god damn dude wake up to urself!!!!!!

  • 2 months later...
You can buy these rims at tempe tyres with rubber for $1450 Brand New, fitted

LOL... same from Donnellans in Melbourne.. but I dont think it's polite to mention that. Let the guy sell his gear.

BlackR32, are you sure these wheels are +35 offset?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...