Jump to content
SAU Community

Recommended Posts

hey guys/gals

my name is mick and i am new to the site and well the skyline scene so i thought this would be a good place to start, and hope that you guys could answer my questions.... i am picking up my R33 GTS-T on friday, it is completely stock auto with i think 2 & half or 3" cat back exhaust.... if some one could tell me how much power i can expect at the wheels from the stock trim... and then an estimate with the following mods:

FMIC

POD filter

exhaust

t3/4e hybrid turbo( roughly 14 psi)

aftermarket management

malpassi reg

any help is appreciated, thanks Mick

Link to comment
https://www.sau.com.au/forums/topic/49598-new-to-site/
Share on other sites

i dont' know about 220rwkw .. maybe .. i just dont' think the auto will cut it ... i had an auto and i had 162rwkw with only a full exhaust, pod, and about 10-11psi ... everything else was fully stock apart from the horn ;) ... i dont' like the idea of having so much power on an auto ... u might as well have a manual

Link to comment
https://www.sau.com.au/forums/topic/49598-new-to-site/#findComment-990465
Share on other sites

allready have a 250kw vl thats a manual... got rid of it for the auto skyline becoz back is playing up and i find it hard to drive the manual...... dont doubt the auto... becoz of course by that stage will beef it up with shift kit stally and so on... so with a healthy auto you think about 220?

Link to comment
https://www.sau.com.au/forums/topic/49598-new-to-site/#findComment-990845
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...